Academic Catalog
About the School of Advanced Manufacturing and Skilled Trades
The School of Advanced Manufacturing and Skilled Trades offers programs that are designed to prepare students for careers in areas such as:
- Automotive Technology – Service Technician, Generator Repair Technician, Shop Foreman, Service Advisor, Heavy Equipment Technician, Heavy Duty Vehicle Technician, or Automotive Technology Instructor for high school, college or industry
- Building Construction – Field Superintendent, Field Project Management, Contractor, or Specialty Subcontractor
- Commercial Graphics Communication – Graphic Design Technician, Digital Assembly Technician, Print Technician, or Graphics Sale Representative
- Heating, Ventilation, and Air Conditioning – Residential or Commercial HIVAC Service Technician, HVAC/R Installation Technician, Apartment Maintenance or Physical Plant Maintenance Technician, Appliance Repair Technician, or Commercial Refrigeration Technician
- Industrial Electricity/Electronics – Electrical Installer, Electrician, or Electrical Technician.
- Machine Tool – machinist, CNC Operator, Set Up Operator or Programmer, Quality Inspector, or Machine Tools Sales Representative
- Mechatronics – Automation Operator, Maintenance Technician, Assembly and Building Technician, or Mechatronics Design Technician
- Welding – Pipe Welder, Fabricator, or Structural Welder
A number of the programs within Advanced Manufacturing and Skilled Trades have developed flexible, short-term certificate programs designed for students who wish to specialize in one area of employment. These certificates also give those in the workforce opportunities to upgrade their skills on modern equipment. The introduction of computers into virtually every aspect of business and industry has increased the need for high-technology training opportunities.
Associate Degree Programs
- Automotive Technology
- Building Construction Technology
- Commercial Graphic Communications
- General Technology
- Heating, Ventilation, Air Conditioning and Refrigeration Technology
- Machine Tool Technology
- Mechatronics Technology
- Welding Technology
Certificate Programs
- Automotive (various)
- Basic Electrical Wiring
- Carpentry
- Heating/Ventilation/Air Conditioning/Refrigeration Mechanics
- Machining
- Mechatronics Technology I
- Renewable Energy Technician
Diploma Programs
- Air Conditioning/Refrigeration
- Industrial Electricity/Electronics
- Machine Tool
All courses are offered on campus; many are also offered in asynchronous online (O), virtual (synchronous online) (V), or hybrid modes (H).
Automotive Technology
Automotive technicians make up the largest service and repair group in the country, and the increasing application of computerized systems in cars and trucks has created a great demand for highly trained professionals.
The Automotive Technology program at Midlands Technical College is designed to provide theory and hands-on training to prepare students to be well-rounded entry-level automotive technicians. Specialization areas emphasize diagnostic and engine performance service, engine overhaul, manual and automatic transmission reconditioning and repair, heat and air conditioning, and all phases of chassis service. Graduates of the Automotive Technology program work in dealerships, independent garages and other related businesses as technicians, parts personnel, services writers and field representatives for manufacturers.
Six separate certificate programs have been developed based on eight ASE (Automotive Service Excellence) categories — engine repair; drive train repair; heating and air conditioning repair; electrical systems repair; brake, suspension and steering repair; and engine performance — to prepare students for the ASE certification exam.
Graduates of this program earn an Associate Degree in Automotive Technology. The six (6) individual certificate programs are also available.
The Automotive Technology Program is Master Certified by NATEF, the National Automotive Technicians Education Foundation. NATEF accreditation validates the quality of the curriculum, facilities and competency of the instructors. NATEF is nationally recognized as the benchmark of automotive education.
All Automotive Technology courses must be passed with a “C” or better to receive credit towards a degree or certificate.
Special Requirements
Students are required to purchase their own safety equipment and tools. A tool list for each course is available upon request.
Newly entering students are required to attend mandatory orientation prior to beginning AUT courses.
Major: Automotive Technology (76 credit hours)
Degree: Associate in Applied Science
| A. GENERAL EDUCATION COURSE REQUIREMENTS (15 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ENG 160 | Technical Communications | 3.0 |
| MAT 155 | Contemporary Mathematics | 3.0 |
| PSY 201 | General Psychology | 3.0 |
| HIS 202 | American History: 1877 to Present | 3.0 |
| CPT 101 | Introduction to Computers | 3.0 |
| Subtotal | 15.0 | |
Major courses meeting other college general education core requirements are starred (*) below.
| B. MAJOR COURSE REQUIREMENTS (21 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| AUT 105 | Beginning Engine Repair | 4.0 |
| AUT 112 | Braking Systems | 4.0 |
| AUT 115 | Manual Drive Train/Axle | 3.0 |
| AUT 131 | Electrical Systems | 3.0 |
| AUT 221 | Suspension and Steering Diagnosis | 3.0 |
| AUT 241 | Automotive Air Conditioning | 4.0 |
| Subtotal | 21.0 | |
| C. OTHER HOURS REQUIRED FOR GRADUATION (40 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| AUT 106 | Intermediate Engine Repair | 4.0 |
| AUT 116 | Manual Transmission and Axle | 4.0 |
| AUT 132 | Automotive Electricity | 4.0 |
| AUT 133 | Electrical Fundamentals | 3.0 |
| AUT 141 | Introduction to Heating and Air Conditioning | 4.0 |
| AUT 145 | Engine Performance | 3.0 |
| AUT 151 | Automotive Transmission/Transaxle | 3.0 |
| AUT 153 | Automatic Transmission Diagnosis | 3.0 |
| AUT 222 | Four-Wheel Alignment | 2.0 |
| AUT 245 | Advanced Engine Performance | 5.0 |
| AUT 262 | Advanced Auto Diagnosis and Repair | 4.0 |
| COL 101 | College Orientation | 1.0 |
| Subtotal | 40.0 | |
| TOTAL CREDIT HOURS | 76.0 | |
Automotive Certificates
| Engine Repair (8 credit hours) | Credit Hours | |
|---|---|---|
| AUT 105 | Beginning Engine Repair | 4.0 |
| AUT 106 | Intermediate Engine Repair | 4.0 |
| TOTAL CREDIT HOURS | 8.0 | |
| DRIVE TRAIN REPAIR (13 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| AUT 115 | Manual Drive Train/Axle | 3.0 |
| AUT 116 | Manual Transmission and Axle | 4.0 |
| AUT 151 | Automatic Transmission/Transaxle | 3.0 |
| AUT 153 | Automatic Transmission Diagnosis | 3.0 |
| TOTAL CREDIT HOURS | 13.0 | |
| HEATING AND AIR CONDITIONING REPAIR (8 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| AUT 141 | Introduction to Heating and Air Conditioning | 4.0 |
| AUT 241 | Automotive Air Conditioning | 4.0 |
| TOTAL CREDIT HOURS | 8.0 | |
| ELECTRICAL SYSTEMS REPAIR (10 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| AUT 131 | Electrical Systems | 3.0 |
| AUT 132 | Automotive Electricity | 4.0 |
| AUT 133 | Electrical Fundamentals | 3.0 |
| TOTAL CREDIT HOURS | 10.0 | |
| BRAKE, SUSPENSION AND STEERING REPAIR (9 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| AUT 112 | Braking Systems | 4.0 |
| AUT 221 | Suspension and Steering Diagnosis | 3.0 |
| AUT 222 | Four-Wheel Alignment | 2.0 |
| TOTAL CREDIT HOURS | 9.0 | |
| ENGINE PERFORMANCE (12 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| AUT 145 | Engine Performance | 3.0 |
| AUT 245 | Advanced Engine Performance | 5.0 |
| AUT 262 | Advanced Auto Diagnosis and Repair | 4.0 |
| TOTAL CREDIT HOURS | 12.0 | |
Building Construction Technology
Building Construction Technology is designed to train the next generation of homebuilders, superintendents, job site personnel, building inspectors and contractors for the construction industry of South Carolina. Training is based on a set of detailed skills standards from the nation’s leaders in the construction industry. Students are encouraged to become a professional in the construction industry. Students will construct a 1664 square foot house from start to finish. This house is built on school grounds and is used as a life size training aid that encompasses all aspects of a construction project. Students learn to build with a “zero-defect” construction philosophy. This means that a commitment to flawless workmanship and unparalleled quality is at the heart of all training activities. Students will experience training in print reading, layout, frame assembly, door and window installation, estimating, scheduling, and other job site duties. Required cooperative education experiences provide students opportunities to hone their management skills, stay in touch with new technologies and trends, and interact with potential employers.
All Building Construction Technology courses must be passed with a “C” or better to receive credit towards a degree or certificate.
Major: Building Construction Technology (62 credit hours)
Degree: Associate In Applied Science
| A. GENERAL EDUCATION COURSE REQUIREMENTS (16 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ENG 160 | Technical Communications | 3.0 |
| SPC 209 OR SPC 205 |
Interpersonal Communications OR Public Speaking |
3.0 |
| HIS 202 | American History: 1877 to Present | 3.0 |
| PSC 215 | State & Local Government | 3.0 |
| MAT 170 | Algebra, Geometry & Trigonometry I | 3.0 |
| COL 101 | College Orientation | 1.0 |
| Subtotal | 16.0 | |
| B. MAJOR COURSE REQUIREMENTS (36 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| BCT 101 | Introduction to Building Construction | 5.0 |
| BCT 102 | Fundamentals of Building Construction | 4.0 |
| BCT 104 | Site Layout and Preparation | 2.0 |
| BCT 111 | Blueprint Reading and Specifications | 3.0 |
| BCT 142 | Fundamentals of Construction Safety | 4.0 |
| BCT 131 | Estimating and Quantity Takeoff | 2.0 |
| BCT 132 | Introduction to Commercial Estimating | 2.0 |
| BCT 209 | Construction Project Management | 3.0 |
| BCT 212 | Construction Methods and Design | 3.0 |
| BCT 221 | Construction Building Codes | 3.0 |
| BCT 223 | Residential Mechanical Systems | 3.0 |
| WLD 102 | Introduction to Welding | 2.0 |
| Subtotal | 36.0 | |
| C. Additional course requirements (10 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| CWE 111 | Cooperative Work Experience I | 5.0 |
| BUS 101 | Introduction to Business | 4.0 |
| BUS 121 | Business Law I | 2.0 |
| MKT 101 | Marketing | 3.0 |
| Subtotal | 10.0 | |
| TOTAL CREDIT HOURS | 62.0 | |
Carpentry Certificate
The Carpentry Certificate is designed to train the next generation of skilled workers needed in the construction industry. This certificate can provide multiple avenues to enter the construction industry without an associate’s degree in building construction technology. Students will experience training in print reading, layout frame assembly, door and windows installation, estimating, scheduling and other job site duties. Students will construct a 1664 square foot house from start to finish. This house is built on school grounds and is used as a life-size training aid that encompasses all aspects of a construction project.
All Building Construction Technology courses must be passed with a “C” or better to receive credit towards a certificate.
| CERTIFICATE: CARPENTRY (29 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| BCT 101 | Introduction to Building Construction | 5.0 |
| BCT 102 | Fundamentals of Building Construction | 4.0 |
| BCT 104 | Site Layout and Preparation | 2.0 |
| BCT 111 | Blueprint Reading and Specifications | 3.0 |
| BCT 131 | Estimating/Quantity Take-off | 2.0 |
| BCT 142 | Fundamentals of Construction Safety | 4.0 |
| BCT 212 | Construction Methods and Design | 3.0 |
| BCT 221 | Construction Building Codes | 3.0 |
| CWE 111 | Cooperative Work Experience | 1.0 |
| WLD 102 | Introduction to Welding | 2.0 |
| TOTAL CREDIT HOURS | 29.0 | |
Commercial Graphics Communications
The Commercial Graphics Communications program is intended to prepare students for gainful employment in the large variety of graphic communications industries, including screen printing, offset lithographic production, and vehicle wrapping. The program includes hands-on technical instruction using the Adobe Creative Suite to create images for digital imaging, traditional printing production methods, screen-printing, and wide format production. Graduates will gain the skills necessary for employment as a graphics technician, in the printing industry as a production technician or in a variety of related industries, depending on their chosen career goal.
Commercial Graphics courses must be passed with a “C” or better to receive credit towards a degree.
Major: Commercial Graphics (61 credit hours)
Degree: Associate in Applied Science
| A. GENERAL EDUCATION COURSE REQUIREMENTS (16 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| COL 101 | College Orientation | 1.0 |
| ENG 160 | Technical Communications | 3.0 |
| HIS 202 | American History: 1877 to Present | 3.0 |
| MAT 155 | Contemporary Math | 3.0 |
| PSY 201 | General Psychology | 3.0 |
| SPC 205 | Public Speaking | 3.0 |
| Subtotal | 16.0 | |
| B. MAJOR COURSE REQUIREMENTS (16 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| CGC 101 | Introduction to Graphic Techniques | 3.0 |
| CGC 111 | Imaging for the Graphics Industry I | 3.0 |
| CGC 120 | Graphic Processes | 3.0 |
| CGC 211 | Digital Art Creation | 3.0 |
| CGC 212 | Digital Image Manipulation | 3.0 |
| CWE 111 | Cooperative Work Experience I | 1.0 |
| Subtotal | 16.0 | |
| C. Additional course requirements (29 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| BUS 101 | Introduction to Business | 3.0 |
| CGC 112 | Imaging for the Graphics Industry II | 3.0 |
| CGC 135 | Commercial Graphic Operations | 3.0 |
| CGC 140 | Industry Exploration | 3.0 |
| CGC 220 | Graphic Processes II | 3.0 |
| CGC 228 | Digital Image Assembly | 3.0 |
| CGC 240 | Senior Projects | 3.0 |
| CPT 170 | Microcomputer Applications | 3.0 |
| CWE 122 | Cooperative Work Experience II | 2.0 |
| MKT 101 | Marketing | 3.0 |
| Subtotal | 29.0 | |
| TOTAL CREDIT HOURS | 61.0 | |
General Technology
The associate degree program in General Technology allows students to tailor their coursework to meet their individual needs.
Students work with their advisors to develop a specific contract for the courses they will take under this degree. (To receive financial assistance, veterans must have prior approval of their programs by a VA counselor.)
All Advanced Manufacturing and Skilled Trades courses must be passed with a “C” or better to receive credit towards a General Technology degree.
Major: General Technology (60-84 Credit Hours)
Degree: Associate in Applied Science
Each contract must have the following elements:
- Minimum of 15 semester-hour credits in general education.
The Associate in General Technology degree program requires a basic core of 15 credits in general education courses. One component of this core must be designed to develop oral and written communication skills and another component must be designed to develop computational skills. Other components of the core must be drawn from each of the following areas: information literacy, humanities or fine arts, social and behavioral sciences, and natural sciences and mathematics. - Minimum of 40 semester-hour credits in major.
The major consists of a minimum of 28 semester-hour credits in an approved degree, diploma or technical education certificate program and an additional 12 semester-hour credits in another technical specialty. Additional courses from the major technical specialty and courses from other technical specialties shall be chosen by students with guidance from their faculty advisor. Students adapt their program to employment objectives and compatible interests. - A range of 5-29 semester-hour credits of electives and/or other additional courses is required for graduation.
The courses in this section are used to adapt the program to meet local employer requirements and student needs. Students’ contracted programs must be approved by the department chair of the major technical specialty
Heating, Ventilation, Air Conditioning/Refrigeration Technology
The Heating, Ventilation, Air Conditioning/Refrigeration Technology program prepares students to work as entry-level technicians in residential and commercial air conditioning, refrigeration, and heating equipment installation and maintenance. Entry-level positions are available in hospitals, factories, schools, restaurants, office complexes, government agencies and local service companies. The associate degree program and shorter diploma and certificate programs are available.
All Heating, Ventilation, Air Conditioning/Refrigeration Technology courses must be passed with a “C” or better to receive credit towards a degree, diploma or certificate.
Special Requirements
Students are required to purchase hand tools and personal safety equipment at a cost of approximately $1050.
Major: Heating, Ventilation, Air Conditioning/ Refrigeration Technology (71 credit hours)
Degree: Associate in Applied Science
| A. GENERAL EDUCATION COURSE REQUIREMENTS (16 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ENG 160 | Technical Communications | 3.0 |
| MAT 155 | Contemporary Mathematics | 3.0 |
| COL 101 | College Orientation | 1.0 |
| PSY 201 | General Psychology | 3.0 |
| HIS 202 | American History: 1877 to Present | 3.0 |
| CPT 101 | Introduction to Computers | 3.0 |
| Subtotal | 16.0 | |
Major courses meeting other college general education core requirements are starred (*) below.
| B. MAJOR COURSE REQUIREMENTS (20 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ACR 101 | Fundamentals of Refrigeration | 5.0 |
| ACR 102 | Tools and Service Techniques | 3.0 |
| ACR 106 | Basic Electricity for HVAC/R | 4.0 |
| ACR 110 | Heating Fundamentals* | 4.0 |
| ACR 120 | Basic Air Conditioning | 4.0 |
| Subtotal | 20.0 | |
| C. ADDITIONAL COURSE REQUIREMENTS (35 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ACR 130 | Domestic Refrigeration | 4.0 |
| ACR 131 | Commercial Refrigeration | 4.0 |
| ACR 206 | Advanced Electricity for HVAC/R | 2.0 |
| ACR 207 | Advanced Refrigeration Electricity | 3.0 |
| ACR 210 | Heat Pumps | 4.0 |
| ACR 220 | Advanced Air Conditioning | 4.0 |
| ACR 221 | Residential Load Calculations* | 2.0 |
| ACR 224 | Codes and Ordinances | 2.0 |
| ACR 231 | Advanced Refrigeration | 4.0 |
| ACR 232 | Refrigeration Calculation and Equipment Selection | 3.0 |
| ACR 250 | Duct Fabrication | 3.0 |
| Subtotal | 35.0 | |
| TOTAL CREDIT HOURS | 71.0 | |
Air Conditioning/Refrigeration Technician
The diploma in Air Conditioning/Refrigeration Mechanics is also the first year of the Associate Degree in Heating, Ventilation, Air Conditioning Technology, including the summer semester. It provides the graduate with the basic technical, math and communication skills needed to enter the service industry.
Special Requirements
Students are required to purchase hand tools and personal safety equipment at a cost of approximately $1050.
Major: Air Conditioning/Refrigeration Technician (45 credit hours)
Diploma: Applied Science
| A. GENERAL EDUCATION COURSE REQUIREMENTS (10 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| MAT 155 | Contemporary Mathematics | 3.0 |
| ENG 160 | Technical Communications | 3.0 |
| COL 101 | College Orientation | 1.0 |
| CPT 101 | Introduction to Computers | 3.0 |
| Subtotal | 10.0 | |
| B. MAJOR COURSE REQUIREMENTS (35 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ACR 101 | Fundamentals of Refrigeration | 5.0 |
| ACR 102 | Tools and Service Techniques | 3.0 |
| ACR 106 | Basic Electricity for HVAC/R | 4.0 |
| ACR 110 | Heating Fundamentals | 4.0 |
| ACR 120 | Basic Air Conditioning | 4.0 |
| ACR 210 | Heat Pumps | 4.0 |
| ACR 250 | Duct Fabrication | 3.0 |
| ACR 130 | Domestic Refrigeration | 4.0 |
| ACR 131 | Commercial Refrigeration | 4.0 |
| Subtotal | 35.0 | |
| TOTAL CREDIT HOURS | 45.0 | |
Heating/Ventilation/Air Conditioning/Refrigeration Mechanics Certificate
The certificate in Heating/Ventilation/Air Conditioning/Refrigeration is composed of the first-year technical courses of the Associate Degree in Heating, Ventilation, Air Conditioning Technology. It provides the graduate with the basic technical skills needed to enter the service industry.
Special Requirements
Students are required to purchase hand tools and personal safety equipment at an approximate cost of $1050.
| CERTIFICATE: HEATING/VENTILATION/AIR CONDITIONING/ REFRIGERATION MECHANICS (35 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ACR 101 | Fundamentals of Refrigeration | 5.0 |
| ACR 102 | Tools and Service Techniques | 3.0 |
| ACR 106 | Basic Electricity for HVAC/R | 4.0 |
| ACR 110 | Heating Fundamentals | 4.0 |
| ACR 120 | Basic Air Conditioning | 4.0 |
| ACR 130 | Domestic Refrigeration | 4.0 |
| ACR 131 | Commercial Refrigeration | 4.0 |
| ACR 210 | Heat Pumps | 4.0 |
| ACR 250 | Duct Fabrication | 3.0 |
| TOTAL CREDIT HOURS | 35.0 | |
Industrial Electricity/Electronics
The Industrial Electricity/Electronics Diploma program emphasizes theory and hands-on training in electrical wiring, including the applications to residential, commercial and industrial installations. Although basic installation of electrical components is an important part of the technician’s job, increased emphasis has been placed on wiring and programming of programmable logic controllers. Entry-level positions for graduates are available with local electrical contractors, industrial plants, hospitals, power companies, government agencies and other related businesses.
All Industrial Electricity/Electronics courses must be passed with a “C” or better to receive credit towards a diploma or certificate.
Special Requirements
- Students are required to purchase a set of small hand tools at an approximate cost of $100.
- Courses taken in this program may be applied toward the Associate in Applied Science in General Technology degree program if the student later elects to pursue the degree.
Major: Industrial Electricity/Electronics (49 credit hours)
Diploma: Applied Science
| A. GENERAL EDUCATION COURSE REQUIREMENTS (9 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ENG 160 | Technical Communications | 3.0 |
| MAT 170 | Algebra, Geometry & Trigonometry | 3.0 |
| PSC 215 | State & Local Government | 3.0 |
| Subtotal | 9.0 | |
| B. MAJOR COURSE REQUIREMENTS (15 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| COL 101 | College Orientation | 1.0 |
| EEM 117 | AC/DC Circuits I | 4.0 |
| EEM 140 | National Electrical Code | 3.0 |
| EEM 151 | Motor Controls I | 4.0 |
| EEM 201 | Electronic Devices I | 3.0 |
| Subtotal | 15.0 | |
| C. ADDITIONAL COURSE REQUIREMENTS (25 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| EEM 118 | AC/DC Circuits II | 4.0 |
| EEM 141 | Residential/Commercial Codes | 3.0 |
| EEM 142 | Commercial/Industrial Codes | 3.0 |
| EEM 165 | Residential/Commercial Wiring | 4.0 |
| EEM 166 | Commercial/Industrial Wiring | 4.0 |
| EEM 172 | Electrical Print Reading | 4.0 |
| EEM 251 | Programmable Controllers | 3.0 |
| Subtotal | 25.0 | |
| TOTAL CREDIT HOURS | 49.0 | |
Basic Electrical Wiring Certificate
The Basic Electrical Wiring Certificate provides a fundamental knowledge of electrical wiring and AC and DC circuits. Students become familiar with electrical codes, ordinances, print reading and electricity fundamentals. Courses taken in this program may be applied toward the Diploma in Industrial Electricity if students later elect to pursue this program.
Special Requirements
- Students are required to purchase a set of small hand tools at an approximate cost of $100.
- Courses taken in this program may be applied toward the Associate of Applied Science in General Technology degree program if the student later elects to pursue the degree
| CERTIFICATE: BASIC ELECTRICAL WIRING (29 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| EEM 117 | AC/DC Circuits I | 4.0 |
| EEM 118 | AC/DC Circuits II | 4.0 |
| EEM 140 | National Electrical Code | 3.0 |
| EEM 141 | Residential/Commercial Codes | 3.0 |
| EEM 142 | Commercial/Industrial Codes | 4.0 |
| EEM 165 | Residential/Commercial Wiring | 3.0 |
| EEM 166 | Commercial/Industrial Wiring | 4.0 |
| EEM 172 | Electrical Print Reading | 4.0 |
| TOTAL CREDIT HOURS | 29.0 | |
Renewable Energy Technician Certificate
The Renewable Energy Technician Certificate provides a fundamental knowledge of electrical wiring, particularly as it applies to the growing field of alternative energy. Students are also given hands-on training in both roof-mount and ground mount solar panel installation, energy storage installation & management and other alternative energy options. Students become familiar with electrical codes, ordinances, print reading and electricity fundamentals. Courses taken in this program may be applied toward the Diploma in Industrial Electricity if students later elect to pursue this program.
Special Requirements
- Students are required to purchase a set of small hand tools at an approximate cost of $100.
- Courses taken in this program may be applied toward the Associate of Applied Science in General Technology degree program if the student later elects to pursue the degree.
| CERTIFICATE: RENEWABLE ENERGY TECHNICIAN (30 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| EEM 117 | AC/DC Circuits I | 4.0 |
| EEM 118 | AC/DC Circuits II | 4.0 |
| EEM 140 | National Electrical Code | 3.0 |
| IMT 102 | Industrial Safety | 2.0 |
| BCT 111 | Blue Print Reading & Specifications | 3.0 |
| EEM 165 | Residential/Commercial Wiring | 4.0 |
| SOL 101 | Solar Building Fundamentals | 3.0 |
| SOL 120 | Basic Solar Technology | 3.0 |
| SOL 201 | Solar Photovoltaic Systems | 4.0 |
| TOTAL CREDIT HOURS | 30.0 | |
Machine Tool Technology
The Machine Tool Technology program is designed to provide skilled machinists for manufacturing industries. The curriculum offers the knowledge and skills necessary to obtain entry-level jobs in a variety of manufacturing environments, as well as the potential to advance to supervisory, sales and training positions.
Students develop skills in the use of precision layout tools, layout techniques, and the setup and operation of mills, lathes, grinders, and other important conventional machines found in a machine shop. More advanced courses are taught in computer numerical control (CNC) programming, setup and operation, plastic injection molding, moldmaking, die making and repair, and jig and fixture design.
With the development of advanced technical systems, students can choose a variety of career paths. Examples are tool and die maker and computer numerical control setup and programming.
All Machine Tool Technology courses must be passed with a “C” or better to receive credit towards a degree, diploma or certificate.
Special Requirements
Students are required to purchase a set of tools when beginning the Machine Tool Technology Program at a cost of approximately $800.
Major: Machine Tool Technology (73 credit hours)
Degree: Associate in Applied Science
| A. GENERAL EDUCATION COURSE REQUIREMENTS (16 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ENG 160 | Technical Communications | 3.0 |
| MAT 170 | Algebra, Geometry & Trigonometry I | 3.0 |
| COL 101 | College Orientation | 1.0 |
| PSY 201 | General Psychology | 3.0 |
| HIS 202 | American History: 1877 to the Present | 3.0 |
| SPC 209 OR SPC 205 |
Interpersonal Communication OR Public Speaking |
3.0 |
| Subtotal | 16.0 | |
Major courses meeting other college general education core requirements are starred (*) below.
| B. MAJOR COURSE REQUIREMENTS (15 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| MTT 151 | Precision Machining I | 3.0 |
| MTT 152 | Precision Machining II | 3.0 |
| MTT 153 | Precision Machining III | 3.0 |
| MTT 154 | Precision Machining IV | 3.0 |
| MTT 250 | Principles of CNC* | 3.0 |
| Subtotal | 15.0 | |
| C. ADDITIONAL COURSE REQUIREMENTS (42 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| MTT 105 | Machine Tool Math Applications | 3.0 |
| MTT 106 | Machine Tool Computer Applications | 3.0 |
| MTT 120 | Machine Tool Print Reading | 3.0 |
| MTT 141 | Metals and Heat Treatment | 3.0 |
| MTT 155 | Precision Grinding | 3.0 |
| MTT 171 | Industrial Quality Control | 2.0 |
| MTT 212 | Tool Design | 4.0 |
| MTT 215 | Tool Room Machining I | 4.0 |
| MTT 216 | Tool Room Machining II | 4.0 |
| MTT 246 | Plastic Moldmaking I | 2.0 |
| MTT 253 | CNC Programming and Operations | 3.0 |
| MTT 252 | CNC Setup and Operations | 4.0 |
| MTT 258 | Machine Tool CAM 3.0 | 3.0 |
| General Elective | 1.0 | |
| Subtotal | 42.0 | |
| TOTAL CREDIT HOURS: | 73.0 | |
Machine Tool
The diploma in Machine Tool is the first year of the Associate Degree in Machine Tool Technology and can be completed in 3 semesters. It provides the student with the basic skills in manual machining to enter the manufacturing or machining industry as well as general education courses that will enhance effectiveness in the workplace.
Major: Machine Tool (44 credit hours)
Diploma: Applied Science
| A. GENERAL EDUCATION COURSE REQUIREMENTS (9 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| ENG 160 | Technical Communications | 3.0 |
| MAT 170 | Algebra, Geometry & Trigonometry I | 3.0 |
| PSY 201 | General Psychology | 3.0 |
| Subtotal | 9.0 | |
| B. MAJOR COURSE REQUIREMENTS (15 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| MTT 151 | Precision Machining I | 3.0 |
| MTT 152 | Precision Machining II | 3.0 |
| MTT 153 | Precision Machining III | 3.0 |
| MTT 154 | Precision Machining IV | 3.0 |
| MTT 250 | Principles of CNC | 3.0 |
| Subtotal | 15.0 | |
| C. ADDITIONAL COURSE REQUIREMENTS (19 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| COL 101 | College Orientation | 1.0 |
| MTT 105 | Machine Tool Math Applications | 3.0 |
| MTT 106 | Machine Tool Computer Applications | 3.0 |
| MTT 212 | Tool Design | 4.0 |
| MTT 120 | Machine Tool Print Reading | 3.0 |
| MTT 141 | Metals and Heat Treatment | 3.0 |
| MTT 155 | Precision Grinding | 3.0 |
| Subtotal | 20.0 | |
| TOTAL CREDIT HOURS: | 44.0 | |
Machine Tool Certificate
The certificate in Machine Tool provides the first year of technical courses in the Associate Degree in Machine Tool Technology and can be completed in 2 semesters. It provides the student with the basic skills in manual machining to enter the manufacturing or machining industry.
| C. ADDITIONAL COURSE REQUIREMENTS (19 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| MAT 170 | Algebra, Geometry, and Trigonometry | 3.0 |
| MTT 120 | Machine Tool Print Reading | 3.0 |
| MTT 151 | Precision Machining I | 3.0 |
| MTT 152 | Precision Machining II | 3.0 |
| MTT 153 | Precision Machining III | 3.0 |
| MTT 154 | Precision Machining IV | 3.0 |
| MTT 105 | Machine Tool Math Applications | 3.0 |
| MTT 106 | Machine Tool Computer Applications | 3.0 |
| TOTAL CREDIT HOURS: | 24.0 | |
Mechatronics Technology
MTC’s Mechatronics Technology Associate Degree prepares students to work in the highly automated manufacturing environment of the 21st century. The program is a good fit for students who desire a hands-on career and are technically inclined. The Mechatronics Technology Associate Degree is a 60-credit-hour program designed to be completed in six semesters if the student follows the program layout. The Mechatronics program responds to an industrial need to have trained technicians with “multi-craft” skills to work on equipment that ranges from packaging equipment to computer integrated manufacturing cells that produce anything from tires to automotive drive components to military grade weapons. The driving force behind the careers is the need for technicians to have skills that include electrical, mechanical, control, quality and computer technologies instead of specializing in one skill area. Mechatronics technicians may assist the design and engineering staffs but are more likely to install, maintain, modify and repair electro-mechanical, manufacturing, automated or process control systems from within a maintenance department.
Students who have completed certain industrial maintenance courses in MTC’s Corporate and Continuing Education may be eligible for advanced placement into this program. For more information, visit the Mechatronics Technology Degree webpage at https://www.midlandstech.edu/programs-and-courses/advanced-manufacturing-and-skilled-trades/mechatronics-associate-degree.
All Mechatronics Technology courses must be passed with a “C” or better to receive credit towards a degree or certificate.
Major: Mechatronics Technology (60 credit hours)
Degree: Associate in Applied Science
| A. General Education Course Requirements (16 credit hours) | Credit Hours | |
|---|---|---|
| MAT 170 | Algebra, Geometry & Trigonometry I | 3.0 |
| ENG 160 | Technical Communications | 3.0 |
| HIS 202 | American History: 1877 to Present | 3.0 |
| PSY 201 | General Psychology | 3.0 |
| COL 101 | College Orientation | 1.0 |
| CPT 170 | Computer Applications | 3.0 |
| Subtotal | 16.0 | |
| B. Major Course Requirements (44 credit hours) | Credit Hours | |
|---|---|---|
| AMT 103 | Sensors | 3.0 |
| AMT 105 | Robotics and Automated Control I | 3.0 |
| AMT 160 | Principles of Quality and Continuous Improvement | 3.0 |
| IMT 104 | Schematics | 2.0 |
| IMT 110 | Industrial Instrumentation | 3.0 |
| IMT 112 | Hand Tool Operations | 3.0 |
| IMT 131 | Hydraulics and Pneumatics | 4.0 |
| IMT 142 | Electric Motors | 2.0 |
| IMT 151 | Piping Systems | 3.0 |
| IMT 160 | Preventative Maintenance | 3.0 |
| IMT 165 | Mechanical Drives and Bearings | 3.0 |
| IMT 212 | Electrical Theory | 3.0 |
| IMT 214 | Industrial Wiring and Fluids | 3.0 |
| IMT 220 | Electrical Distribution Equipment | 3.0 |
| IMT 233 | Programmable Logic Controllers | 3.0 |
| Subtotal | 44.0 | |
| TOTAL CREDIT HOURS: | 60.0 | |
Mechatronics Technology I Certificate
MTC’s Mechatronics Technology I Certificate program prepares students to work in the highly automated manufacturing environment of the 21st century. The program is a good fit for students who desire a hands-on career and are technically inclined. The Mechatronics Technology Certificate is a 25 credit hour program designed to be completed in two semesters if the student follows the program layout. Course sequencing is structured but allows students to graduate in a fairly short time frame. Course topics include: AC/DC electricity, principles of manufacturing processes and production, print reading/CAD, industrial safety, hydraulics and pneumatics, programmable logic controllers, motors, basic principles of mechanics, sensors, and machine tool basics.
All Mechatronics Technology courses must be passed with a “C” or better to receive credit towards a degree or certificate.
Courses taken in this program may be applied toward the Associate in Applied Science in General Technology degree program if the student later elects to pursue the degree.
| CERTIFICATE: MECHATRONICS TECHNOLOGY I (25 CREDIT HOURS) | Credit Hours | |
|---|---|---|
| COL 101 | College Orientation | 1.0 |
| IMT 104 | Schematics | 2.0 |
| IMT 112 | Hand Tool Operations | 3.0 |
| IMT 131 | Hydraulics and Pneumatics | 4.0 |
| IMT 165 | Mechanical Drives and Bearings | 3.0 |
| IMT 212 | Electrical Theory | 3.0 |
| IMT 214 | Industrial Wiring | 3.0 |
| IMT 233 | Programmable Logic Controllers | 3.0 |
| MAT 170 | Algebra, Geometry, and Trigonometry | 3.0 |
| TOTAL CREDIT HOURS: | 25.0 | |
Welding Technologies
The AAS in Welding prepares graduates for entry level welding positions within the fabrication, manufacturing, and construction industries that require skills in print reading, layout, welding and cutting processes.
The program seeks to provide graduates with the skills necessary to succeed in positions ranging from aluminum welding for custom boat fabrication to pipe welding for nuclear power generation components. Graduates entering the workforce will be well versed in multiple welding disciplines, fabrication techniques, and job-site safety practices.
Students who have completed Welding courses in MTC’s Corporate and Continuing Education may be eligible for advanced placement into this program. For more information, students should consult their Academic and Career Advisor.
All Welding Technology courses must be passed with a “C” or better to receive credit toward a degree or certificate.
Special Requirements
Students are required to purchase approximately $500 worth of welding tools and equipment.
Major: Welding Technologies (62 credit hours)
Degree: Associate in Applied Science
| A. General Education (16 Credit Hours) | Credit Hours | |
|---|---|---|
| CPT 101 | Introduction to Computers | 3.0 |
| COL 101 | College Orientation | 3.0 |
| ENG 160 | Technical Communications | 3.0 |
| HIS 202 | American History: 1877 to Present | 3.0 |
| MAT 170 | Algebra, Geometry, and Trigonometry | 3.0 |
| PSY 201 | General Psychology | >3.0 |
| Subtotal | 16.0 | |
| B. Required Core Courses (46 Credit Hours) | Credit Hours | |
|---|---|---|
| WLD 102 | Introduction to Welding | 2.0 |
| WLD 103 | Print Reading I | 1.0 |
| WLD 105 | Print Reading II | 1.0 |
| WLD 109 | Gas Metal Arc Welding 2 | 3.0 |
| WLD 110 | Welding Safety and Health | 1.0 |
| WLD 111 | Arc Welding I | 4.0 |
| WLD 115 | Arc Welding III | 4.0 |
| WLD 120 | Flux Cored Arc Welding I | 4.0 |
| WLD 134 | Inert Gas Welding Non-Ferrous | 3.0 |
| WLD 136 | Advanced Inert Gas Welding | 2.0 |
| WLD 140 | Weld Testing | 1.0 |
| WLD 142 | Maintenance Welding | 3.0 |
| WLD 154 | Pipe Fitting and Welding | 4.0 |
| WLD 160 | Fabrication Welding | 3.0 |
| WLD 170 | Qualification Welding | 4.0 |
| WLD 202 | Cutting Fundamentals | 2.0 |
| WLD 228 | Inert Gas Pipe Welding I | 4.0 |
| Subtotal | 46.0 | |
| TOTAL CREDIT HOURS: | 62.0 | |
Welding and Cutting Fundamentals
The Welding and Cutting Fundamentals Certificate includes the fundamentals of the most commonly used welding processes and provides graduates with the skills necessary to succeed in positions utilizing basic Shielded Metal Arc Welding, Gas Metal Arc Welding, Flux Cored Arc Welding, Gas Tungsten Arc Welding, Oxy-Fuel Cutting, 85 Plasma Arc Cutting, Carbon Arc Gouging, and Mechanical Cutting. Graduates entering the workforce will be well versed in multiple welding disciplines and job-site safety practices.
This certificate will is stackable with the more advanced Welding Qualifications Certificate and can be applied toward the Associate Degree in Welding Technology.
Students who have completed Welding courses in MTC’s Corporate and Continuing Education may be eligible for advanced placement into this program. For more information, students should consult their Academic and Career Advisor.
All Welding Technology courses must be passed with a “C” or better to receive credit toward a degree or certificate.
Special Requirements
- Students are required to purchase approximately $500 worth of welding tools and equipment.
- Courses taken in this program may be applied toward the Associate in Applied Science in Welding Technologies.
| WELDING AND CUTTING FUNDAMENTALS (24 Credit Hours) | Credit Hours | |
|---|---|---|
| WLD 102 | Introduction to Welding | 2.0 |
| WLD 103 | Print Reading I | 1.0 |
| WLD 109 | Gas Metal Arc Welding 2 | 3.0 |
| WLD 110 | Welding Safety and Health | 1.0 |
| WLD 111 | Arc Welding I | 4.0 |
| WLD 115 | Arc Welding III | 4.0 |
| WLD 120 | Flux Cored Arc Welding I | 4.0 |
| WLD 134 | Inert Gas Welding Non-Ferrous | 3.0 |
| WLD 202 | Cutting Fundamentals | 2.0 |
| TOTAL CREDIT HOURS: | 24.0 | |
Welding Qualifications
The Welding Qualifications Certificate covers advanced techniques in the most commonly used welding processes and provides graduates with the skills necessary to succeed in positions utilizing Shielded Metal Arc Welding, Gas Metal Arc Welding, Flux Cored Arc Welding, Gas Tungsten Arc Welding in advanced areas of manufacturing and construction to include fabrication and pipe welding. Graduates entering the workforce will be well versed in multiple welding disciplines and job-site safety practices.
This certificate will is stackable with the Welding and Cutting Fundamentals Certificate and can be applied toward the Associate Degree in Welding Technology.
Students who have completed Welding courses in MTC’s Corporate and Continuing Education may be eligible for advanced placement into this program. For more information, students should consult their Academic and Career Advisor. 86
All Welding Technology courses must be passed with a “C” or better to receive credit toward a degree or certificate.
Special Requirements
- Students are required to purchase approximately $500 worth of welding tools and equipment.
- Courses taken in this program may be applied toward the Associate in Applied Science in Welding Technologies.
| WELDING AND CUTTING FUNDAMENTALS (24 Credit Hours) | Credit Hours | |
|---|---|---|
| WLD 105 | Print Reading 2 | 1.0 |
| WLD 136 | Advanced Inert Gas Welding | 2.0 |
| WLD 140 | Weld Testing | 1.0 |
| WLD 142 | Maintenance Welding | 3.0 |
| WLD 154 | Pipefitting and Welding | 4.0 |
| WLD 160 | Fabrication Welding | 3.0 |
| WLD 170 | Qualification Welding | 4.0 |
| WLD 228 | Inert Gas Pipe Welding I | 4.0 |
| TOTAL CREDIT HOURS: | 22.0 | |