Filter by:

Industrial Maintenance

Basic Mechanical Components

ID: CEIMT-693

This course identifies couplings, chain drives, bearings, mechanical and other seals, gaskets and O-rings. It covers the function and advantages of each and teaches how to select and install or remove the proper component. Fan and blower types and operation are also discussed. Safety & Rigging Fundamentals is a prerequisite for this course.

  • Total Hours: 80.00
  • CEUs: 8.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Bearings and Lubrication

ID: CEIMT-694

Explains lubrication safety, storage, classifications, selecting lubricants, additives, lubrication equipment and lubricating charts. Introduces plain, ball, roller, thrust, guide, flanged, pillow-block, and take-up bearings. It also explains bearing materials and bearing designations. Basic Mechanical Components is a prerequisite for this course.

  • Total Hours: 56.00
  • CEUs: 5.60
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Fasteners and Anchors

ID: CEIMT-688

This class describes the various threaded and non-threaded fasteners used in Industrial Maintenance. Students will learn how to select the correct fastener and the proper methods of installation. Prerequisite: Applied Math.

  • Total Hours: 12.00
  • CEUs: 1.20
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Gearboxes

ID: CEIMT-695

This course identifies and explains gearboxes and their uses. Explains how they operate and various types of gears. Troubleshooting and repair of gearboxes will be demonstrated. It shows wear patterns and proper backlash and adjustment. Bearings & Lubrication is a prerequisite for this course.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Hand and Power Tools

ID: CEIMT-689

This class introduces students to various hand and power tools that are used in Industrial Maintenance applications. It explains basic hand tool safety and procedures for selecting, inspecting, using and maintaining the tools. Introduces different types of power tools and teaches procedures for selecting, using and maintaining these tools. Fasteners and Anchors is a prerequisite for this course.

  • Total Hours: 44.00
  • CEUs: 4.40
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Precision Measuring

ID: CEIMT-690

This course covers the concept of measurement starting with rulers and levels. The class includes precision measuring tools such as calipers, micrometers, height gauges, surface plates and dial indicators. It explains how to read the various precision measuring instruments. Learn how to select, use & care for precision measuring tools. Hand & Power Tools is a prerequisite for this course.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Pumps

ID: CEIMT-696

This course explains pumps and their operation. It covers reciprocating pumps and various kinds of rotary pumps. A lesson on special-purpose pumps describes diaphragm pumps and pumps used for corrosive and abrasive materials. Also covered is the maintenance of pumps, including the replacement of packing glands, seals, and bearings. Gearboxes is a prerequisite for this course.

  • Total Hours: 40.00
  • CEUs: 4.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Safety and Rigging Fundamentals

ID: CEIMT-692

Learn how to work and rig loads safely. This course includes personal protective equipment, how to perform basic contruction tasks safely and what to do if an accident occurs. It covers the slings, hardware, hoists and hitches used in rigging operations. Highlights critical safety issues and accepted rigging techniques and practices. Blueprint Reading is a prerequisite for this course.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Course Search