Filter by:
Use this legend to navigate
Industrial Electrical Technician
Basic Electronics
ID: CEEEM-562
Learn basic electronics principles, components, and functions including atomic structure of conductors, insulators, and semi-conductors, characteristics of current flow and resistor construction, semi-conductor construction, and basic diode types. Prerequisite: Electrical Print Reading.
- Total Hours: 30.00
- CEUs: 3.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Basic Math for Electricians
ID: CEEEM-566
This course provides the math skills a student needs to begin the study of electricity. The course provides students with fundamentals of arithmetic and a review of basic math. Higher level math (square, square-root, reciprocal, exponents) and trig used in electrical calculations are taught.
- Total Hours: 10.00
- CEUs: 1.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Electrical Fundamentals I
ID: CEEEM-563
Learn the basic concepts of electricity - beginning with atomic structure and electron current flow, including electrical quantities, Ohm's Law, static electricity, magnetism, resistance, basic DC circuits, electrical units, and power measuring instruments. Prerequisite: Basic Math for Electricians.
- Total Hours: 42.00
- CEUs: 4.20
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Electrical Fundamentals II
ID: CEEEM-564
Continue in the study of the fundamentals of electricity and effective troubleshooting techniques on the job with the intermediate concepts of electricity: Magnetic Induction, Basic Trigonometry and Vectors, Alternating Current, and Inductance and Capacitance in Series and Parallel Circuits. Prerequisite: Electrical Fundamentals I.
- Total Hours: 36.00
- CEUs: 3.60
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Electrical Fundamentals III
ID: CEEEM-551
Learn about three phase circuits, circuit impedance, and the effects of capacitance/inductance in RCL series and parallel circuits, including single-phase transformers, three phase wye and delta connections, transformers, DC generators, DC motors, three- phase alternators, single motors, and three phase motors. Prerequisite: Electrical Fundamentals II.
- Total Hours: 30.00
- CEUs: 3.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Electrical Motor Controls
ID: CEEEM-505
Learn to work with relays, timers, push buttons, magnetic starters, fuses overloads and wiring practices, all of which are related to industry and motor control. Students will physically connect three-phase motors and control circuits as part of the course. Basic Electronics is the pre-requisite for this course.
- Total Hours: 30.00
- CEUs: 3.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Electrical Print Reading
ID: CEEEM-579
Learn to read and interpret electrical blueprints and schematics used in residential and industrial settings. Emphasis will be on hands-on applications of print reading, circuit knowledge and troubleshooting circuits through the use of prints. Prerequisite: Electrical Fundamentals III.
- Total Hours: 16.00
- CEUs: 1.60
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Programmable Logic Controllers
ID: CEEEM-507
Learn to use the hardware and software associated with the Programmable Logic Controller (PLC), using Allen Bradley PLC trainers and MicroLogix software. Learn the basics of programming, including basic Boolean algebra. Prerequisite: Variable Frequency Drives.
- Total Hours: 30.00
- CEUs: 3.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Troubleshooting
ID: CEEEM-580
Learn to safely and efficiently troubleshoot and locate electrical problems using schematic prints along with electrical measuring tools such as multimeters, clamp-on meters, ammeters, megohmmeters, proximity voltage meters, hand-held oscilloscopes, and other measuring devices. Prerequisite: Programmable Logic Controller.
- Total Hours: 30.00
- CEUs: 3.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
Variable Frequency Drives
ID: CEEEM-552
The introduction of Variable Frequency Drives in the workplace has become the path forward for new installations and upgrades in the industry. Understand the basics of PWM (Pulse Width Modulated) drives, Sensorless Vector Control, IGBT Power Outputs, using the industry standard, Allen-Bradley drives, the AB 1336 Plus, and Power Flex. Prerequisite: Electrical Motor Controls .
- Total Hours: 30.00
- CEUs: 3.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or
cce@midlandstech.edu.
