Filter by:

Use this legend to navigate

Electrical (Classroom)

Basic Electronics-B

ID: CEEEM-588

Learn basic electronics principles, components, and functions including atomic structure of conductors, insulators, and semi-insulators, solid-state device construction, diode rectifier circuits, transistor theory of operation, and switch and amplifier applications.Prerequisities: Electrical Fundamentals I and II, Electrical Print reading or skills assessment completion.

  • Total Hours: 44.00
  • CEUs: 4.40
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Elecctrical Fundamentals II -B

ID: CEEEM-585

Continue the study of the fundamentals of electricity with the intermediate concepts of electricity: basic trigonometry and vectors, alternating current, the effects and interaction of resistance, and inductance and capacitance in series and parallel circuits. Prerequisites: Electrical Fundamentals I or skills assessment completion.

  • Total Hours: 48.00
  • CEUs: 4.80
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Electrical Fundamentals III -B

ID: CEEEM-586

Complete the study of electrical fundamentals by learning the properties and applications of single-phase transformers, three-phase wye and delta transformer connections, DC generators, DC motors, three-phase alternators, and single and three=phase AC motors. Prerequisites: Electrical Fundamentals I and II or skills assessment completion.

  • Total Hours: 44.00
  • CEUs: 4.40
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Electrical Motor Controls-B

ID: CEEEM-589

Learn to work with relays, timers, push buttons, magnetic starters, fuses overloads, wiring practices, and motor circuit protection principles, all of which are related to indusstry and motor control. You will physically connect three-phase motors and control circuits as part of this course.Prerequisites: Electrical Fundamentals III or skills assessment completion.

  • Total Hours: 48.00
  • CEUs: 4.80
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Electrical Print Reading -B

ID: CEEEM-587

Learn to read and interpret electrical blueprints and schematics used in residential, commercial, and industrial settings. Emphasis will be on the applications of print reading and circuit and electrical symbols knowledge. Prerequisites: Electrical Fundamentals I, II or skills assessment completion.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Industrial Sensor Technology-B

ID: CEEEM-590

Study various industrial sensors including discrete electro-mechanical and electronic devices, analog devices such as transducers, thermocouples, and RTDs. Prerequisites: Electrical Fundamentals I and II, Electrical Print Reading, and Basic Electronics or skills assessment.

  • Total Hours: 44.00
  • CEUs: 4.40
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Programmable Logic Controllers - B

ID: CEEEM-592

Study theory of operation, programming, installation, and standard wiring practices using All Bradley MicroLogix processors and Logix 500 software. You will learn basic ladder programming principles using bit, timer, and counter instructions. Prerequisites: Industrial Sensors and Basic Electronics or skills assessment completion.

  • Total Hours: 52.00
  • CEUs: 5.20
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Troubleshooting-B

ID: CEEEM-593

You will develop methodology, identify, and locate electrical problems using diagrams and basic electrical measuring tools. Prerequisites: Industrial Sensors, Electrical Motor Controls, Print Reading, Variable Frequency Drives, and Programmable Logic Controllers or skills assessment completion.

  • Total Hours: 48.00
  • CEUs: 4.80
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Variable Frequency Drives-B

ID: CEEEM-591

Study theory of operation, programming, installation and standard wiring practices. You will work with both the AutomationDirect GS-1 and Allen Bradley Powerflex 40 VFDs. Prerequisites: Industrial Sensors, Basic Electronics, and Electrical Motor Controls or skills assessment completion.

  • Total Hours: 52.00
  • CEUs: 5.20
View available classes
No sections currently available. For information on Training classes, contact our Corporate and Continuing Education Department (CCE) at 803.732.0432 or cce@midlandstech.edu.

Course Search