Choose a Category:

Construction Show

Print Reading for Construction

ID: CECLR-515

Learn the basics of reading construction blueprints. Primary emphasis is on architectural and structural plans. Learn symbols, terminology, and abbreviations associated with reading construction plans.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Residential Builder Exam Prep

ID: CECLR-523

Prepares experienced residential trades people to pass the SC Home Builders Exam. Emphasis is on study methods, test taking procedures, and highlighting the reference materials recommended by the examiners. State exam references are surveyed and recommendations made concerning study, tabbing, and highlighting key information.

  • Total Hours: 15.00
  • CEUs: 1.50
View available classes

Residential Building Codes

ID: CECLR-506

This class explains the SC Residential Codes Manual focusing on areas that building contractors need to know to pass the State Exam. The course will explain relevant portions of the code that residential contractors, home inspectors, or homeowners need to understand to be sure work is performed according to code.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Residential Building Framing and Finishing

ID: CECLR-532

Learn to frame floors, walls, ceilings and roofs; build stairs; and install roof coverings, siding, windows and doors, interior wall coverings, cabinets, and trim. Emphasis is placed on construction-industry approved building methods and estimating procedures. Training prepares students for the SC Home Builders Exam.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Residential Building, Site Preparation and Foundations

ID: CECLR-531

Learn to lay out and prepare a building site, pour footings and slabs, and build concrete and masonry foundations using multimedia classroom presentations and field demonstrations. Emphasis is on construction industry approved building methods and estimating procedures. Helps prepare students for the SC Home Builders Exam.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Residential Contractor Business and Law

ID: CECLR-508

This course helps prepare you for the Business and Law portion of the SC Home Builders Exam. This class will also help individuals who plan to build their own home, as well as currently licensed contractors and home inspectors to understand legal and management issues involved in construction.

  • Total Hours: 15.00
  • CEUs: 1.50
View available classes

Electrical Show

Photovoltaic Technician Career Prep - Online

ID: CEPTN-678

The Photovoltaic Technician Career Prep course covers the principles of photovoltaics and how to effectively incorporate PV systems into stand- alone or interconnected electrical systems. The content includes system advantages and disadvantages, site evaluation, component operation, system design and sizing, and installation requirements and recommended practices. Common scenarios and procedures are discussed throughout.

  • Total Hours: 145.00
  • CEUs: 14.50
View available classes

Forklift Operator Show

Forklift Training

ID: CEHEQ-501

Learn the correct care and use of forklift equipment. Topics include information covered in OSHA's Powered Industrial Truck Standard (OSHA Standard 1910.178). Successful students receive a three-year forklift certificate. Safety requirements prohibit open, cloth or high-heeled shoes. Students must be 18 years of age.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Home Welding Courses Show

Basic Welding for Home Projects

ID: CEWLD-511

Learn the basic of stick welding, oxy-fuel cutting torches and review of MIG welding skills. With instructor approval and your own materials, our experienced instructors will guide you through the steps to begin your fabrication project. Previous projects have included artwork, oyster tables, carts, trailer repairs and furniture. It is recommended to have completed the MIG or TIG welding course first, but it is not a requirement.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

MIG Welding Basics

ID: CEWLD-870

From thing gauge sheet metal to 1/2 thick steel, MIG welding (aka wire feed or GMAW), is versatile and easy to learn. From automotive restoration and boat trailers to law mower decks and works of art, this process covers all the bases. Our knowledable instructors will teach you about welding machine set-up, safety and MIG welding basics even if you have no previous welding experience. Required equipment for class: Welding helmet, welding cap, MIG gloves, safety glasses, welding jacket, MIG welding pliers, locking pliers, tape measure, work boots and flame retardant clothing.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

TIG Welding Basics

ID: CEWLD-880

When precision and control are important, TIG welding (GTAW) is the gold standard. GTAW requires exceptional hand-eye coordination and concentration. Learn TIG welding basics on carbon steel, stainless steel and aluminum. You can use this process to buid racecar chassis and roll cages or repair pontoons and John boats. It is recommended to have completed the MIG welding course first, but it is not a requirement.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

HVAC Show

HVACR Certified Technician - Online

ID: CEGAT-678

The HVACR Certified Technician program is a unique, all-inclusive online training that encompasses heating, ventilation, air conditioning, and refrigeration. The program is structured to provide an instruction on the skills necessary to installers and technicians who are either new to the industry or planning on expanding their knowledge and skills to advance in the industry. This program is truly all-encompassing, because as a part of your tuition, you will receive paid exam vouchers to take exams that lead to the most significant industry certifications.

  • Total Hours: 265.00
  • CEUs: 26.50
View available classes

Industrial Electrical Technician Show

Basic Electronics

ID: CEEEM-562

Learn basic electronics principles, components and functions including atomic structure of conductors, insulators, and semi-conductors; characteristics of current flow and resistor construction; semi-conductor construction and basic diode types. Electrical Print Reading is the pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Basic Math for Electricians

ID: CEEEM-566

This course provides the math skills a student needs to begin the study of electricity. The course provides students with fundamentals of arithmetic and a review of basic math. Higher level math (square, square-root, reciprocal, exponents) and trig used in electrical calculations are taught.

  • Total Hours: 10.00
  • CEUs: 1.00
View available classes

Electrical Code Journeyman

ID: CEEEM-502

Prepare to take the licensing exam (city, state, or county) for journeyman electricians. Learn problem solving, voltage drop, conduit, fuse, wire load sizing, grounding and other residential wiring. Emphasis is placed on the codebook.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Electrical Fundamentals I

ID: CEEEM-563

Learn the basic concepts of electricity - beginning with atomic structure and electron current flow, including electrical quantities, Ohm's Law, static electricity, magnetism, resistance, basic DC circuits, electrical units and power measuring instruments. Prerequisite: Basic Math for Electricians.

  • Total Hours: 42.00
  • CEUs: 4.20
View available classes

Electrical Fundamentals II

ID: CEEEM-564

Continue in the study of the fundamentals of electricity and effective troubleshooting techniques on the job with the intermediate concepts of electricity: Magnetic Induction, Basic Trigonometry and Vectors, Alternating Current, and Inductance and Capacitance in Series and Parallel Circuits. Prerequisite: Electrical Fundamentals I.

  • Total Hours: 36.00
  • CEUs: 3.60
View available classes

Electrical Fundamentals III

ID: CEEEM-551

Learn about three phase circuits, circuit impedance and the effects of capacitance/inductance in RCL series and parallel circuits, including single-phase transformers, three phase wye and delta connections, transformers, DC generators, DC motors, three- phase alternators, single motors, and three phase motors. Prerequisite: Electrical Fundamentals II.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Electrical Motor Controls

ID: CEEEM-505

Learn to work with relays, timers, push buttons, magnetic starters, fuses overloads and wiring practices, all of which are related to industry and motor control. Students will physically connect three-phase motors and control circuits as part of the course. Basic Electronics is the pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Electrical Print Reading

ID: CEEEM-579

Learn to read and interpret electrical blueprints and schematics used in residential and industrial settings. Emphasis will be on hands-on applications of print reading, circuit knowledge and troubleshooting circuits through the use of prints. Electrical Fundamentals III is prerequisites for this course.

  • Total Hours: 16.00
  • CEUs: 1.60
View available classes

Programmable Logic Controllers

ID: CEEEM-507

Learn to use the hardware and software associated with the Programmable Logic Controller (PLC), using Allen Bradley PLC trainers and MicroLogix software. Learn the basics of programming, including basic Boolean algebra. Variable Frequency Drives is a pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Troubleshooting

ID: CEEEM-580

Learn to safely and efficiently troubleshoot and locate electrical problems using schematic prints along with electrical measuring tools such as multimeters, clamp-on meters, ammeters, megohmmeters, proximity voltage meters, hand-held oscilloscopes, and other measuring devices. Programmable Logic Controllers is a pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Variable Frequency Drives

ID: CEEEM-552

The introduction of Variable Frequency Drives in the workplace has become the path forward for new installations and upgrades in the industry. Understand the basics of PWM (Pulse Width Modulated) drives, Sensorless Vector Control, IGBT Power Outputs, using the industry standard, Allen-Bradley drives, the AB 1336 Plus and Power Flex. Electrical Motor Controls is a pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Industrial Maintenance Show

Basic Mechanical Components

ID: CEIMT-693

This course identifies couplings, chain drives, bearings, mechanical and other seals, gaskets and O-rings. It covers the function and advantages of each and teaches how to select and install or remove the proper component. Fan and blower types and operation are also discussed. Safety & Rigging Fundamentals is a prerequisite for this course.

  • Total Hours: 80.00
  • CEUs: 8.00
View available classes

Bearings and Lubrication

ID: CEIMT-694

Explains lubrication safety, storage, classifications, selecting lubricants, additives, lubrication equipment and lubricating charts. Introduces plain, ball, roller, thrust, guide, flanged, pillow-block, and take-up bearings. It also explains bearing materials and bearing designations. Basic Mechanical Components is a prerequisite for this course.

  • Total Hours: 56.00
  • CEUs: 5.60
View available classes

Blueprint Reading

ID: CEIMT-691

The course explains different types of blueprint drawings (civil, architectural, structural, mechanical, plumbing/piping, electrical), how to interpret them and teaches field sketching. It explains orthographic projection, isometric and schematic drawings used to show electrical, piping, hydraulic, and pneumatic systems. Precision Measuring is a prerequisite for this course.

  • Total Hours: 72.00
  • CEUs: 7.20
View available classes

Gearboxes

ID: CEIMT-695

This course identifies and explains gearboxes and their uses. Explains how they operate and various types of gears. Troubleshooting and repair of gearboxes will be demonstrated. It shows wear patterns and proper backlash and adjustment. Bearings & Lubrication is a prerequisite for this course.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes

Pumps

ID: CEIMT-696

This course explains pumps and their operation. It covers reciprocating pumps and various kinds of rotary pumps. A lesson on special-purpose pumps describes diaphragm pumps and pumps used for corrosive and abrasive materials. Also covered is the maintenance of pumps, including the replacement of packing glands, seals, and bearings. Gearboxes is a prerequisite for this course.

  • Total Hours: 40.00
  • CEUs: 4.00
View available classes

Safety and Rigging Fundamentals

ID: CEIMT-692

Learn how to work and rig loads safely. This course includes personal protective equipment, how to perform basic contruction tasks safely and what to do if an accident occurs. It covers the slings, hardware, hoists and hitches used in rigging operations. Highlights critical safety issues and accepted rigging techniques and practices. Blueprint Reading is a prerequisite for this course.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes

Locksmith Show

Locksmithing Certificate

ID: CELKS-503

Fundamental theories of locksmithing are introduced, enabling students to apply beginning skills. Lessons include blank key cutting, lock disassembly, lock reassembling and lock pinning. History, applications and tools will be covered. Current SLED background check required, $25. Report due at first class meeting. Text included.

  • Total Hours: 24.00
  • CEUs: 503.00
View available classes

Manufacturing Show

Biofuel Production Operations - Online

ID: CEGAT-641

The Biofuel Production Operations Online Training Program will give you the education you need to begin an exciting career in biofuel production. As a biofuel production operator, your job will be to ensure the quality and purity of the biofuel your plant produces. This involves inspecting and repairing equipment, operating computer systems, and handling lab equipment. This online program will ensure you have the skills you need to handle these tasks. At the present time, hundreds of facilities worldwide are producing biofuels. Over the next few decades many advances will be made in this field, and hundreds of new facilities will be built to produce this type of fuel. This opens a new field for potential workers. For decades to come, biofuels will be produced and consumed in the United States, creating an ongoing demand for biofuel production workers.

  • Total Hours: 400.00
  • CEUs: 40.00
View available classes

Blueprint Reading and Basic Measuring Tools

ID: CEMFG-588

An introductory course in blueprint reading or precision measuring tools. This course will take you through the alphabet of lines, views, and general rules for reading engineering blueprints. This course will also provide hands-on training in the use of micrometers, calipers, height gages, indicators and various transfer gages.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Chemical Plant Operations - Online

ID: CEGAT-643

Prepare for an entry-level position in a chemical plant with the Chemical Plant Operations Online Training Program. In the United States, there are thousands of chemical manufacturing facilities, run by chemical plant operators. These operators are highly paid and enjoy a stable work environment. There is an ongoing need for entry-level personnel. This program can help you get your start in this field!

  • Total Hours: 400.00
  • CEUs: 40.00
View available classes

Fundamentals of CNC Operator/ Programmer Training

ID: CEMFG-572

Gain the knowledge to become a CNC operator/programmer. Topics covered: shop math, right angle trig., English/Metric conversion tooling for mills and lathes, CNC offsets, cutting speed and fee calculations, inter-working, and functionality of the actual CNC machine components. Prerequisite: Blueprint Reading, Mills and Lathe classes.

  • Total Hours: 54.00
  • CEUs: 5.40
View available classes

Industrial Quality Control

ID: CEMFG-642

This course covers the methods and procedures of quality control. Topics include Geometric Dimensioning and Tolerancing. Statistical Process Control and CMM Operation and Programming.

  • Total Hours: 56.00
  • CEUs: 5.60
View available classes

Introduction to Lathes

ID: CEMFG-626

Learn the set-up and basic working knowledge of machining lathes. Learn proper safety, care, set-up and operation of manual turning lathe. An excellent course for students with little machining background or students taking the CNC Operator/Programmer certificate program. Prerequisite: Blueprint Reading & Basic Measuring Tools course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Introduction to Mills

ID: CEMFG-627

Learn the set-up and basic working knowledge of vertical mills. Learn proper safety, care, set-up and operation of manual machine shop mills. An excellent course for students with little machining background or students taking the CNC Operator/Programmer certificate program. Prerequisite: Blueprint Reading & Measuring Tools course

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Manufacturing Applications - Online

ID: CEETG-948

Increase efficiencies and productivity by learning to apply the principles and concepts of manufacturing. Discover the nature of strategy and learn how it leads to the development of manufacturing strategy. Understand the purpose of customer demand forecasting and find out what forecasting methods are suitable for which situations. Explore the nature of planning and learn how to effectively use Gantt charts and the precedence diagram method. Determine how purchasing, production and inventory control, and logistics support a manufacturing operation. Discover the basics of lean manufacturing and see how capacity management converts production plans into concrete products. Learn why manufacturing, industrial, and quality engineering are so essential to any firm.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Manufacturing Certified Production Technician (MSSC-CPT)

ID: CEMFG-527

The MSSC Certified Production Technician program is a nationally recognized certification program covering the skills needed by manufacturing workers. The credential is awarded upon successfully completing the Safety, Quality Practices and Measurement, Manufacturing Processes and Production, and Maintenance Awareness assessments.

  • Total Hours: 160.00
  • CEUs: 16.00
View available classes

Manufacturing Fundamentals - Online

ID: CEETG-729

Learn the basic skills required to work in the manufacturing field. Discover the role of production design, process planning, and the heart of 13 different manufacturing processes. Understand why facility location and plant layout decisions are so vital and learn how job design helps you accomplish company goals and achieve worker satisfaction. Find out what makes up the physical work environment and learn how to characterize different types of production materials. Master product development concepts such as the voice of the customer (VOC), quality function deployment (QFD), and failure mode and effects analysis (FMEA). Learn how performance measurements and standardization improve manufacturing operations.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Mastering CNC Programming

ID: CEMFG-580

An application-based course covering the knowledge and skills acquired from the Fundamentals and Principles classes. You will utilize your new knowledge to write CNC programs, select tooling and set up the CNC equipment to produce parts to specifications from your own CNC program. Prerequisite: Principles of CNC Operator/Programming

  • Total Hours: 48.00
  • CEUs: 4.80
View available classes

Principles of CNC Programming

ID: CEMFG-571

Transform blueprints into CNC machine programs by designing your own generated CNC programs on computer based simulators in the classroom. Topics covered include: machine language (G & M codes), work coordinates, various types of offsets, cutter compensation, canned cycles, etc. Prerequisite: Fundamentals of CNC Operator/Programmer.

  • Total Hours: 60.00
  • CEUs: 6.00
View available classes

SC Manufacturing Certification (SCMC)

ID: CEMFG-635

The South Carolina Manufacturing Certification is a South Carolina certification program covering the skills needed by manufacturing workers. The credential is awarded upon successfully completing the Safety, Quality Practices and Measurement, Manufacturing Processes and Production, and Maintenance Awareness assessments. In addition we will be providing hands-on simulation training to reinforce the manufacturing skills taught in the classroom.

  • Total Hours: 200.00
  • CEUs: 20.00
View available classes

SC Manufacturing Certification Scholarship Information Session Only""

ID: CECES-681

If you are interested in improving your skills and joining a team of manufacturing professionals, come to this session to learn about MTC's South Carolina Manufacturing Certified Production Technician training program. The South Carolina Manufacturing Certified (SCMC) Production Technician program is a state and nationally recognized, industry-led training, and certification program focused on teaching students the core skills and knowledge needed to become an advanced manufacturing production worker. Employment opportunities are currently available with local employers. Scholarships are available for qualified candidates. Clean criminal background check and drug/alcohol screen required in order to qualify.

  • Total Hours: 2.00
  • CEUs: 0.20
View available classes

Mechanical Show

Hydraulics and Pneumatics

ID: CEIMT-699

Describes pumps & valves used in hydraulic & pneumatic systems & their functions. Explains hydraulic/pneumatic system safety & basic principles of hydraulics, including Pascal's law and Bernaulli's principle. Covers how to inspect, troubleshoot and repair fluid power systems. Hands on training is included. Valves & Piping is a prerequisite for this course.

  • Total Hours: 72.00
  • CEUs: 7.20
View available classes

Shaft Alignment

ID: CEIMT-697

This course covers types of misalignment and aligning couplings using conventional and laser alignment techniques. How to measure shaft sag, perform vertical alignment and align machinery trains is discussed. Causes of vibration, vibration monitoring, vibration test equipment and how to field balance machines are included. Pumps is a prerequisite for this course.

  • Total Hours: 76.00
  • CEUs: 7.60
View available classes

Valves and Piping

ID: CEIMT-698

This course covers the selection, preparation, joining and support of copper, plastic and steel piping and fittings. The course provides instructions for cutting, threading and joining ferrous piping. Introduces chemical, compressed air, fuel oil, steam and water systems and explains how to identify piping systems according to color codes. Shaft Alignment is a prerequisite for this course.

  • Total Hours: 40.00
  • CEUs: 4.00
View available classes

Pool Operator Show

SC Certified Pool Operator

ID: CECPO-500

Prepares individuals responsible for operating and/or managing swimming pools or spas in SC to sit for the CPO Exam and covers pertinent topics. A calculator is needed. Topics include SC rules and regulations, legal requirements, water chemistry, filtration and circulation disinfection techniques, water testing, troubleshooting, problem prevention, and safety. The SC CPO exam is administered through Applied Measurement Professionals (AMP) and details are discussed in class. 1.800.345.6559 or www.goamp.com. The exam will not be taken in class.

  • Total Hours: 6.00
  • CEUs: 0.60
View available classes

Purchasing Show

Cert. Green Supply Chain Professional - Online

ID: CEGAT-692

The Certified Green Supply Chain Professional Online Training Program will give you the specialized knowledge to enable a company to achieve its environmental sustainability goals through global sourcing, materials management, procurement and buying, transportation and logistics, and new product development.

  • Total Hours: 60.00
  • CEUs: 6.00
View available classes

Purchasing and Supply Chain Management - Online

ID: CEGAT-554

The Purchasing and Supply Chain Management Online Training Program will introduce you to the fundamental aspects of the supply chain environment, including enterprise resource planning systems and requirement systems. The interrelationships between purchasing, vendor selection, sources of supply, and technology will also be explored in this program. The focus is on management and the skills and resources that a successful manager needs. This online certificate program is offered in partnership with major colleges, universities, and other accredited education providers. This program is best-suited for someone with little or no experience in purchasing management. PMBOK® Guide, PMI®, PMP®, CAPM®, and the PMI R.E.P. logo are either marks or registered marks of the Project Management Institute, Inc.

  • Total Hours: 300.00
  • CEUs: 30.00
View available classes

Purchasing Fundamentals - Online

ID: CEETG-829

This course serves as a high-level overview of the broad purchasing body of knowledge. The supply chain concept is used as a framework in facilitating understanding that must take place regarding the role that purchasing plays in an organization's success. Administration of the purchasing department, basic legal issues, organizational interfaces and negotiations are course highlights.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Supply Chain Management Fundamentals - Online

ID: CEETG-848

An introductory class that integrates key Supply Chain activities including purchasing, manufacturing, distribution and customer demand. Tools are provided that are directly related to future career success, peer and industry recognition and improved decision-making. Topics covered include: forecasting, master planning, material requirements planning, inventory management, capacity planning, production activity control, distribution and sales and operations planning. Process flows beginning with suppliers and ending with customers are reviewed. Essential definitions and key relationships are explored.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Safety and Environmental Show

Asbestos Inspector

ID: CEASB-508

Federal and state regulations require specific training for personnel involved in asbestos management. This inspector course is designed for individuals who inspect for the presence of asbestos. SC-DHEC and NC-DHHS approved. Requires pre-notification to regulatory authorities and may be used for NC and SC licensing.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Asbestos Inspector Refresher

ID: CEASB-501

Upon successful completion of the course, students will receive certificates of re-accreditation that may be used for licensing purposes.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 4.00
  • CEUs: 0.40
View available classes

Asbestos Management Planner Refresher and Asbestos Inspector Refresher

ID: CEASB-507

This course combines the four-hour Asbestos Inspector Refresher Training and the four-hour Asbestos Management Planner Refresher training. It reviews the initial Asbestos Inspector course and the Asbestos Management Planner course. Students will receive certificates of re-accreditation that may be used for licensing purposes.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Asbestos O and M Worker

ID: CEASB-510

This course meets SC-DHEC and EPA AHERA/ASHARA requirements for operations and maintenance workers performing clean-up or repair activities on friable asbestos-containing materials in schools, municipal water facilities, industrial manufacturing, and electrical generating facilities. Requires annual refresher.

  • Total Hours: 16.00
  • CEUs: 1.60
View available classes

Asbestos O and M Worker Refresher

ID: CEASB-509

Reviews the initial Asbestos Operations and Maintenance Worker course. Students will receive certificates of re-accreditation used for licensing. SC-DHEC, NC-DHHS, and OSHA approved asbestos abatement training. Requires pre-notification to authorities and may be used for NC and SC licensing as an asbestos abatement professional.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Asbestos Supervisor

ID: CEASB-505

The course meets SC-DHEC and EPA AHERA/ASHARA requirements for supervisors of asbestos projects and the NIOSH 582 course. Also for SC-DHEC licensing for persons performing air monitoring on asbestos projects and for the OSHA Competent Person training for all asbestos work in accordance with 1926.1101. Annual refresher required.

  • Total Hours: 37.50
  • CEUs: 3.75
View available classes

Asbestos Supervisor Refresher

ID: CEASB-506

Reviews the initial AHERA Asbestos Supervisor course required for asbestos abatement supervisors in schools and public and commercial buildings and meets the annual refresher training requirements for OSHA Class I and II Competent person and SC-DHEC Asbestos Supervisor licensees. Students will receive certificates used for licensing.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 7.50
  • CEUs: 0.75
View available classes

Asbestos Worker

ID: CEASB-503

This course meets SC-DHEC and EPA AHERA/ASHARA accreditation requirements for abatement workers disturbing friable asbestos in schools and in public and commercial buildings. The course meets the requirements of OSHA 1926.1101. Course completers receive a certificate of accreditation used for licensing purposes.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Asbestos Worker Refresher

ID: CEASB-504

This course reviews the initial AHERA Asbestos Worker course required for asbestos abatement workers in schools and public and commercial buildings. The course meets the annual refresher training requirements for OSHA Class I asbestos workers and SC-DHEC Asbestos Worker licensees. Students receive certificates for licensing purposes.Student musthave completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 7.50
  • CEUs: 0.75
View available classes

General Construction Safety

ID: CESAF-695

Learn safety and health principles to help you meet OSHA requirements. Upon completion of the General Construction Safety course you will be able to identify OSHA regulatory requirements for construction sites and work knowledgeably within OSHA's construction standards. Special emphasis is placed on areas in construction that most commonly result in worker injury or property damage. Students will receive a 10-hour OSHA Construction completion card.

  • Total Hours: 15.00
  • CEUs: 1.50
View available classes

HazWoper 24-Hour Moderate Risk - Online

ID: CEPTN-687

This Internet-based course provides 24 hours of interactive training online for those needing Moderate Risk certification (29 CFR 1910.120). Topics include exercises on PPE, Regulations, Site Characterization, Confined Space, Decontamination, etc. The course consists of an online text, interactive exercises, web links, self-grading quizzes, and final exam.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Lead Renovation, Repair and Painting

ID: CELED-500

EPA rules apply to contractors who renovate or repair housing, child-care facilities or schools built before 1978. Trained contractors and workers must follow lead-safe work practice standards to reduce potential exposure to dangerous levels of lead during renovation and repair work. These standards are taught in this course.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Lead Renovation, Repair and Painting Refresher

ID: CELED-507

For those who have taken the initial Lead Renovation, Repair & Painting course, this is a one half day refresher course to licensing as mandated by EPA regulations. This course reviews the contents of the initial course & is required by EPA every five years. Abatement professionals may take this refresher instead of the initial course to satisfy EPA requirements.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 4.00
  • CEUs: 0.40
View available classes

Lead Safe Weatherization

ID: CELED-505

In addition to the EPA certification requirements for lead renovators, workers performing weatherization in pre-1978 housing funded by the US Department of Energy (DOE) must have training in Lead Safe Weatherization.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Solid Waste Operation Certificate - Online

ID: CEPTN-630

This four-course program is important training for homeland security as it relates to solid waste management. This introductory course includes instruction in Landfill operations, Composting operations, Household Hazardous Waste and Wastewater Operations (solids). These classes will meet or exceed most state requirements for the educational components of certification and/or licensing required for solid waste professionals.

  • Total Hours: 132.00
  • CEUs: 13.20
View available classes

Small Engine Mechanic Show

Small Engine Mechanic

ID: CESME-506

Gain a working knowledge of types and operation of small engines, engine service and repair of outdoor power equipment, engine tune-up procedures and troubleshooting methods, engine failure analysis, engine performance measurement, engine system and engine rebuild procedures. See www.midlandstech.edu/training for required tools. Lots of hands on learning.

  • Total Hours: 45.00
  • CEUs: 4.50
View available classes

Sustainability Show

Certified Microbial Investigator - Online

ID: CEPTN-618

Take your HVAC or mold inspection services to a new level by learning the latest advances in the industry and while you`re at it, getting the industry`s most recognized microbial certifications, Council-certified Microbial Investigator (CMI) and Council-certified Microbial Consultant (CMC). We`ll teach you the core skills needed to perform impressive assessments that will set you apart from the competition.

  • Total Hours: 28.00
  • CEUs: 2.80
View available classes

Commercial Energy Consultant - Online

ID: CEPTN-619

This program consists of training, certification, and business start-up kit. You will receive everything you need to be able to go out and start conducting retail energy audits. The Commercial Energy Consultant Training Program is a comprehensive training program designed to teach you the basics of energy auditing, the economics of energy and how to turn that knowledge into a functioning, profitable business for yourself. Once you have successfully completed the Commercial Energy Training Program and passed the NEASI Commercial Energy Certification exam, you are fully prepared to start your very own energy business. The best way to jump-start your Energy Business is with our Commercial Energy Business Kit.

  • Total Hours: 25.00
  • CEUs: 2.50
View available classes

Home Energy Auditor - Online

ID: CEPTN-626

This program consists of training, certification, and business start-up kit. You will receive everything you need to be able to go out and start conducting home/residential energy audits. You will learn to identify the common energy wasting areas of a residence. You will also learn more in-depth energy conservation techniques to enable you to provide your clients with the maximum in energy savings insight. Each course is easy to follow and understand, yet detailed and descriptive to educate you thoroughly. Once you have successfully completed the Home Energy Training Program and passed the NEASI Home Energy Certification exam, you are fully prepared to start your very own home energy business. The best way to jump-start your energy business is with our Home Energy Business Kit.

  • Total Hours: 25.00
  • CEUs: 2.50
View available classes

Renewable Energy Technician Career Prep - Online

ID: CEPTN-679

This course gives the background for renewable energy sources and describes their occurrence, devices for using them, and the role of renewable energy in current and future energy systems, depending on social values and the economic rules used to judge the viability of competing solutions.

  • Total Hours: 380.00
  • CEUs: 38.00
View available classes

Senior Certified Sustainablility Prof - Online

ID: CEGAT-609

The Senior Certified Sustainability Professional Training Program will prepare you for an exciting career as a leader in the green-collar economy. As a certified sustainability professional, you'll be responsible for setting the course and coordinating an enterprise's sustainability strategy. Millions of new jobs in this rapidly growing sector will be available to people who set themselves apart from the crowd by earning the professional credentials and skills they need to lead sustainable business practices.

  • Total Hours: 110.00
  • CEUs: 11.00
View available classes

Solar Water Heating Technician Career Prep - Online

ID: CEPTN-680

This course covers solar fundamentals, site assessment, system design and sizing, the installation and service of system components, system startup and maintenance, and worker safety. Solar Water addresses residential and light commercial solar water heating systems for domestic hot water and swimming pool applications.

  • Total Hours: 70.00
  • CEUs: 7.00
View available classes

Start Your Own Business in Solar Energy - Online

ID: CEPTN-683

The purpose of this course is to give the student tools, information, and strategies to equip them in a way that will give them the best chance of success when starting a Solar Energy business. We will discuss topics such as risk, economics, the global market, ethics, legal considerations, organization, humans resources, and marketing. As a student reads, completes practices and assignments, discusses with others, and takes assessments, he or she will gain a practical understanding of the components of a small business and the steps that one takes to create and establish that business, from the idea, to the business plan, to the strategies for helping that business to succeed and grow.

  • Total Hours: 340.00
  • CEUs: 34.00
View available classes

Sustainable Business Management Career Prep Expert - Online

ID: CEPTN-684

This course defines the subject matter of sustainable and green marketing, and illustrates how green marketing can be incorporated into strategic planning. It addresses the interplay between environment and consumption, and an organizations effort to offer superior value to consumers via sustainable oriented marketing practices.

  • Total Hours: 340.00
  • CEUs: 34.00
View available classes

Sustainable Business Management Career Prep Master - Online

ID: CEPTN-685

This course defines the subject matter of sustainable and green marketing, and illustrates how green marketing can be incorporated into strategic planning. It addresses the interplay between environment and consumption, and an organizations effort to offer superior value to consumers via sustainable oriented marketing practices. As a Sustainable Supply Chain Manager you will need to develop action plans, and implement green supply chains. This course provides a firm foundation for supply change management and tips to help you implement green initiatives. In this course you will learn to make concrete supply chain decisions and identify lean and green savings for supply chains.

  • Total Hours: 430.00
  • CEUs: 43.00
View available classes

Sustainable Business Management Career Prep Professional - Online

ID: CEPTN-686

This course will provide students with a thorough understanding of management, with a focus on the characteristics of successful managers, manager development, and the importance of critical thinking in management. Using a theoretical approach, this course will encourage students to define effective management and identify the strategies necessary to be successful business managers. Upon completion of this course, students will be fully prepared to begin working as business managers.

  • Total Hours: 240.00
  • CEUs: 24.00
View available classes

Sustainable Construction Career Prep - Online

ID: CEPTN-688

This course describes the high-performance green building delivery system, a rapidly emerging building delivery system that satisfies the owner while addressing sustainability considerations of economic, environmental, and social impact, from design through the end of the building's life cycle. A building delivery system is the process used by building owners to ensure that a facility meeting their specific needs is designed, built, and handed over for operation in a cost-effective manner.

  • Total Hours: 155.00
  • CEUs: 15.50
View available classes

Sustainable Energy and Management Career Prep Expert - Online

ID: CEPTN-689

The skyrocketing demand for clean, abundant energy has resulted in a need for comprehensive information that can be used by builders, technicians, energy industry professionals, and anyone else wanting to learn about alternative forms of energy and their everyday uses. With a vast array of information available on the subject, this course stands out from other courses because it bridges the gap between overly simplistic information and high-level engineering materials. Instead, this course explores solar, wind, and other sources, and the technology available to harness them. Learners will gain a better understanding of how these systems work as well as how they are put together.

  • Total Hours: 430.00
  • CEUs: 43.00
View available classes

Sustainable Energy Career Prep Master - Online

ID: CEPTN-690

This course explores realistically, and in detail, the world's enormous potential for human and ecological regeneration. It also explains why this potential has been suppressed or distorted by industrial institutions, thus creating economic crisis, growing inequality, and environmental destruction. As a Sustainable Supply Chain Manager you will need to develop action plans, and implement green supply chains. This course provides a firm foundation for supply change management and tips to help you implement green initiatives. In this course you will learn to make concrete supply chain decisions and identify lean and green savings for supply chains.

  • Total Hours: 690.00
  • CEUs: 69.00
View available classes

Sustainable Photovoltaic Career Prep Expert - Online

ID: CEPTN-691

The Photovoltaic Technician Career Prep course covers the principles of photovoltaics and how to effectively incorporate PV systems into stand-alone or interconnected electrical systems. The content includes system advantages and disadvantages, site evaluation, component operation, system design and sizing, and installation requirements and recommended practices. Common scenarios and procedures are discussed throughout. This course gives the background for renewable energy sources and describes their occurrence, devices for using them, and the role of renewable energy in current and future energy systems, depending on social values and the economic rules used to judge the viability of competing solutions.

  • Total Hours: 500.00
  • CEUs: 50.00
View available classes

Sustainable Solar and Wind Technician Career Prep Expert - Online

ID: CEPTN-692

This course covers the principles of photovoltaics and how to effectively incorporate PV systems into stand-alone or interconnected electrical systems. The content includes system advantages and disadvantages, site evaluation, component operation, system design and sizing, and installation requirements and recommended practices. Common scenarios and procedures are discussed throughout. The course also provides an overview of wind-energy history, basic concepts, costs, and uses. It is designed for the novice and emphasizes an overview of wind-energy conversion and applications of various wind-turbine systems.

  • Total Hours: 450.00
  • CEUs: 45.00
View available classes

Sustainable Solar and Wind Technician Career Prep Professional - Online

ID: CEPTN-693

This course covers solar fundamentals, site assessment, system design and sizing, the installation and service of system components, system startup and maintenance, and worker safety. Solar Water addresses residential and light commercial solar water heating systems for domestic hot water and swimming pool applications. The course also provides an overview of wind-energy history, basic concepts, costs, and uses. It is designed for the novice and emphasizes an overview of wind-energy conversion and applications of various wind-turbine systems. Some additional course features include: wind turbine blades, installing and troubleshooting wind turbines, motors, towers, and electrical coverage.

  • Total Hours: 390.00
  • CEUs: 39.00
View available classes

Sustainable Solar Technician Career Prep Professional - Online

ID: CEPTN-694

The Photovoltaic Technician Career Prep course covers the principles of photovoltaics and how to effectively incorporate PV systems into stand-alone or interconnected electrical systems. The content includes system advantages and disadvantages, site evaluation, component operation, system design and sizing, and installation requirements and recommended practices. Common scenarios and procedures are discussed throughout.

  • Total Hours: 210.00
  • CEUs: 21.00
View available classes

Sustainable Solar Water Heating Career Prep Professional - Online

ID: CEPTN-695

This course gives the background for renewable energy sources and describes their occurrence, devices for using them, and the role of renewable energy in current and future energy systems, depending on social values and the economic rules used to judge the viability of competing solutions. This course covers solar fundamentals, site assessment, system design and sizing, the installation and service of system components, system startup and maintenance, and worker safety. Solar Water addresses residential and light commercial solar water heating systems for domestic hot water and swimming pool applications.

  • Total Hours: 430.00
  • CEUs: 43.00
View available classes

Weatherization Energy Auditor (BPI) - Online

ID: CEPTN-513

This course is specifically designed to help a person to prepare for the BPI Envelope Professional Written and Field Examinations. If you are interested in working as a shell technician or installer for helping weatherize homes, use our materials to get the training to help prepare you for working as a shell technician and to prepare for the Envelope Professional Field Exams. Learn how a house and its ducts are tested for leakiness. Learn about energy in the home and where to look for reducing air infiltration and increasing insulation to reduce energy bills. This program also includes a valuable residential basic training package (8 DVD's and a manual) to help you understand how the components in a house work and what they actually look like with over a thousand real life scenes from actual homes. Some additional field work/training is extremely helpful but not required before the BPI certification can be obtained.

  • Total Hours: 120.00
  • CEUs: 12.00
View available classes

Wind Energy Professional - Online

ID: CEGAT-652

Wind energy companies are growing exponentially to meet America's demand for clean, renewable, domestic energy. This entry-level Wind Energy Professional Online Training Program prepares you for a career in the wind energy industry.

  • Total Hours: 240.00
  • CEUs: 24.00
View available classes

Wind Energy Technician Career Prep - Online

ID: CEPTN-699

As the world's shift away from reliance on fossil fuels the Wind Energy Industry leads the way. In just a few short decades wind energy has evolved dramatically. Technological advances now make wind energy a cost-effective solution for the world's ever-growing energy needs. The United States leads in the overall wind power capacity. As the wind energy industry continues to expand in the United States and around the globe, it will provide many opportunities for workers in search of new careers. These careers extend beyond the wind farm and include the efforts of employees who work in manufacturing plants, offices, and construction, as well as operation and maintenance.

  • Total Hours: 265.00
  • CEUs: 26.50
View available classes

Transportation and Logisitics Show

Freight Broker/Agent Training

ID: CEGAT-688

Learn the skills you need in order to be a successful Freight Broker/Agent. In this growing industry, as a service based business, you connect shippers and manufacturers with transportation companies and manage those shipments. Become a part of the exciting trucking, freight logistics, and transportation industries as a licensed freight broker or as a freight broker agent. From licensing and operations, to sales and marketing, you'll learn the basics of how to run a domestic freight brokerage or agency in the United States.

  • Total Hours: 180.00
  • CEUs: 18.00
View available classes

Welder-Day Program Show

Advanced Welding QuickJobs Day Program

ID: CEWLD-619

This course is offered to students who completed the Basic and Intermediate Welding courses and is open to persons demonstrating advanced welding skills to the instructor. The student must show competency in Shielded Metal Arc Welding, Gas Tungsten Arc Welding and Gas Metal Arc Welding or have completed the Entry and Intermediate Welding courses. The student will be introduced to high-pressure pipe welding. During the course, the student will be required to weld root passes, hot passes and fill and cover passes to code requirements on various diameter pipe. This class is intense and prepares the student for testing to corporate standards such as the American Welding Society (AWS) and American Society of Mechanical Engineers (ASME) section IX. Students completing this course will possess skills required in the pipe welding and fabrication industry.

  • Total Hours: 320.00
  • CEUs: 32.00
View available classes

Basic Welding QuickJobs Day Program

ID: CEWLD-601

The QuickJobs Basic Welding Course offers the student introductory training needed to enter the welding profession. Upon completion of the course, the student will have competent training in safety, basic metallurgy, and industrial tool operation. Entry level welding skills will include fillet and groove welding in basic positions using the (SMAW) process. The student will be required to perform welding to industrial standards such as the American Welding Society (AWS). Students completing this course will have entry level skills needed for construction positions and for general fabrication shops or be ready for the Intermediate Welding Class, which is the next level of training in the Day QuickJobs program.

  • Total Hours: 360.00
  • CEUs: 36.00
View available classes

Intermediate Welding QuickJobs Day Program

ID: CEWLD-602

This course is offered to students who completed the Basic Welding QuickJobs Day course and is open to persons demonstrating necessary welding skills to the instructor. Students are trained in the following: Personal safety (continuation); SMAW welding in non-standard positions-2 weeks; Gas Metal Arc Welding (GMAW) to include solid wire and dual shield flux cored wire in fillet and groove welding-2 weeks; Gas Tungsten Arc Welding (GTAW) in multiple positions and metals to include steel, aluminum and stainless steel-4 weeks. The student will be required to perform welding to industrial standards such as the American Welding Society (AWS). Students completing this course will have basic and intermediate skills required as minimums for employment in the construction industry and fabrication shops, high-rise construction and maintenance welding and repairs.

  • Total Hours: 320.00
  • CEUs: 32.00
View available classes

Welder-Evening Program Show

Advanced Pipe Welding

ID: CEWLD-831

Learn advanced methods and technique for welding 6 pipe using the SMAW and GTAW processes in multiple positions in accordance with AWS and ASME codes and standards. Includes welding open root joints using GTAW with intermediate passes and final cap using GTAW and SMAW. Prerequisite; CEWLD 830 Basic Pipe Welding.

  • Total Hours: 96.00
  • CEUs: 9.60
View available classes

Advanced Shielded Metal Arc Welding

ID: CEWLD-801

Continue learning Shielded Metal Arc Welding (SMAW) using advanced welding techniques and joint configurations in accordance with AWS and ASME codes and standards. Includes a continuation of grove welds with backing and open root V-grooves in multiple positions. Prerequisite - CEWLD 800 Basis Shielded Metal Arc Welding.

  • Total Hours: 102.00
  • CEUs: 10.20
View available classes

Basic Pipe Welding

ID: CEWLD-830

Learn basic methods and technique for welding 6 pipe using the SMAW process in multiple positions in accordance with AWS and ASME codes and standards. Includes welding open root joints using E6010 electrodes with E7018 intermediate passes and final cap. Prerequisite; CEWLD 820 Gas Tungsten Arc Welding.

  • Total Hours: 90.00
  • CEUs: 9.00
View available classes

Basic Shielded Metal Arc Welding and Oxy-Fuel Cutting

ID: CEWLD-800

Learn basic Shielded Metal Arc Welding (SMAW) using various electrodes and joint configurations in accordance with AWS and ASME codes and standards. Includes T-joints, grooves with backing, basic blueprint reading, weld symbols, safety and an introduction to the oxy-fuel cutting processes.

  • Total Hours: 102.00
  • CEUs: 10.20
View available classes

Gas Metal and Flux Core Arc Welding

ID: CEWLD-810

Learn basic Gas Metal Arc Welding (GMAW) and Flux Core Arc Welding (FCAW) processes using various technique and joint configurations in accordance with AWS and ASME codes and standards. Includes 1/8 to 3/8 thick material for GMAW welding and 3/8 to 1 for FCAW in various positions. Prerequisite: CEWLD 801 Advanced Shielded Metal Arc Welding.

  • Total Hours: 90.00
  • CEUs: 9.00
View available classes

Gas Tungsten Arc Welding

ID: CEWLD-820

Learn Gas Tungsten Arc Welding (GTAW) using basic and advanced welding techniques and various joint configurations in accordance with AWS and ASME codes and standards. Includes welding T-joints and open root V-grooves in multiple positions. Prerequisite: CEWLD 810 Gas Metal and Flux Core Arc Welding.

  • Total Hours: 96.00
  • CEUs: 9.60
View available classes

Practice Welding - 9

ID: CEWLD-624

This class helps students prepare for a welding test.

  • Total Hours: 9.00
  • CEUs: 0.90
View available classes

Featured Program

Small Engine Mechanic

This training program provides participants with a working knowledge of types and operation of small engines, engine service and repair of outdoor power equipment. Learn how to perform engine tune-up procedures and troubleshooting methods, engine failure analysis; engine performance measurement, engine system and engine rebuild procedures.

Learn More