Choose a Category:

Basic Welding for Home Projects Show

Basic Welding for Home Projects

ID: CEWLD-511

Learn the various welding techniques you can use in home projects. Includes safe practices, brazing, and arc welding. Learn how to safely and effectively use a cutting torch, do minor non-structural repairs, or weld artwork. Personal equipment needs will be discussed at the first class (additional cost of approximately $100).

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Construction Show

Print Reading for Construction

ID: CECLR-515

Learn the basics of reading construction blueprints. Primary emphasis is on architectural and structural plans. Learn symbols, terminology, and abbreviations associated with reading construction plans.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Residential Building Codes

ID: CECLR-506

This class explains the SC Residential Codes Manual focusing on areas that building contractors need to know to pass the State Exam. The course will explain relevant portions of the code that residential contractors, home inspectors, or homeowners need to understand to be sure work is performed according to code.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Residential Building Framing and Finishing

ID: CECLR-532

Learn to frame floors, walls, ceilings and roofs; build stairs; and install roof coverings, siding, windows and doors, interior wall coverings, cabinets, and trim. Emphasis is placed on construction-industry approved building methods and estimating procedures. Training prepares students for the SC Home Builders Exam.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Residential Building, Site Preparation and Foundations

ID: CECLR-531

Learn to lay out and prepare a building site, pour footings and slabs, and build concrete and masonry foundations using multimedia classroom presentations and field demonstrations. Emphasis is on construction industry approved building methods and estimating procedures. Helps prepare students for the SC Home Builders Exam.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Residential Contractor Business and Law

ID: CECLR-508

This course helps prepare you for the Business and Law portion of the SC Home Builders Exam. This class will also help individuals who plan to build their own home, as well as currently licensed contractors and home inspectors to understand legal and management issues involved in construction.

  • Total Hours: 15.00
  • CEUs: 1.50
View available classes

Electrical Show

Basic Electronics

ID: CEEEM-562

Learn basic electronics principles, components and functions including atomic structure of conductors, insulators, and semi-conductors; characteristics of current flow and resistor construction; semi-conductor construction and basic diode types. Electrical Print Reading is the pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Basic Math for Electricians

ID: CEEEM-566

This course provides the math skills a student needs to begin the study of electricity. The course provides students with fundamentals of arithmetic and a review of basic math. Higher level math (square, square-root, reciprocal, exponents) and trig used in electrical calculations are taught.

  • Total Hours: 10.00
  • CEUs: 1.00
View available classes

Electrical Code Journeyman

ID: CEEEM-502

Prepare to take the licensing exam (city, state, or county) for journeyman electricians. Learn problem solving, voltage drop, conduit, fuse, wire load sizing, grounding and other residential wiring. Emphasis is placed on the codebook.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Electrical Code Masters

ID: CEEEM-503

Review the electrical codebook and learn how and where to find articles pertaining to certain subjects. Includes basic electrical problems, one-family dwellings, multi-family dwellings, sizing wire, pipe and junction boxes.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Electrical Fundamentals I

ID: CEEEM-563

Learn the basic concepts of electricity - beginning with atomic structure and electron current flow, including electrical quantities, Ohm's Law, static electricity, magnetism, resistance, basic DC circuits, electrical units and power measuring instruments. Prerequisite: Basic Math for Electricians.

  • Total Hours: 42.00
  • CEUs: 4.20
View available classes

Electrical Fundamentals II

ID: CEEEM-564

Continue in the study of the fundamentals of electricity and effective troubleshooting techniques on the job with the intermediate concepts of electricity: Magnetic Induction, Basic Trigonometry and Vectors, Alternating Current, and Inductance and Capacitance in Series and Parallel Circuits. Prerequisite: Electrical Fundamentals I.

  • Total Hours: 36.00
  • CEUs: 3.60
View available classes

Electrical Fundamentals III

ID: CEEEM-551

Learn about three phase circuits, circuit impedance and the effects of capacitance/inductance in RCL series and parallel circuits, including single-phase transformers, three phase wye and delta connections, transformers, DC generators, DC motors, three- phase alternators, single motors, and three phase motors. Prerequisite: Electrical Fundamentals II.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Electrical Motor Controls

ID: CEEEM-505

Learn to work with relays, timers, push buttons, magnetic starters, fuses overloads and wiring practices, all of which are related to industry and motor control. Students will physically connect three-phase motors and control circuits as part of the course. Basic Electronics is the pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Electrical Print Reading

ID: CEEEM-579

Learn to read and interpret electrical blueprints and schematics used in residential and industrial settings. Emphasis will be on hands-on applications of print reading, circuit knowledge and troubleshooting circuits through the use of prints. Electrical Fundamentals III is prerequisites for this course.

  • Total Hours: 16.00
  • CEUs: 1.60
View available classes

Photovoltaic Technician Career Prep - Online

ID: CEPTN-678

The Photovoltaic Technician Career Prep course covers the principles of photovoltaics and how to effectively incorporate PV systems into stand- alone or interconnected electrical systems. The content includes system advantages and disadvantages, site evaluation, component operation, system design and sizing, and installation requirements and recommended practices. Common scenarios and procedures are discussed throughout.

  • Total Hours: 145.00
  • CEUs: 14.50
View available classes

Programmable Logic Controllers

ID: CEEEM-507

Learn to use the hardware and software associated with the Programmable Logic Controller (PLC), using Allen Bradley PLC trainers and MicroLogix software. Learn the basics of programming, including basic Boolean algebra. Variable Frequency Drives is a pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Troubleshooting

ID: CEEEM-580

Learn to safely and efficiently troubleshoot and locate electrical problems using schematic prints along with electrical measuring tools such as multimeters, clamp-on meters, ammeters, megohmmeters, proximity voltage meters, hand-held oscilloscopes, and other measuring devices. Programmable Logic Controllers is a pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Variable Frequency Drives

ID: CEEEM-552

The introduction of Variable Frequency Drives in the workplace has become the path forward for new installations and upgrades in the industry. Understand the basics of PWM (Pulse Width Modulated) drives, Sensorless Vector Control, IGBT Power Outputs, using the industry standard, Allen-Bradley drives, the AB 1336 Plus and Power Flex. Electrical Motor Controls is a pre-requisite for this course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Forklift Operator Show

Forklift Training

ID: CEHEQ-501

Learn the correct care and use of forklift equipment. Topics include information covered in OSHA's Powered Industrial Truck Standard (OSHA Standard 1910.178). Successful students receive a three-year forklift certificate. Safety requirements prohibit open, cloth or high-heeled shoes. Students must be 18 years of age.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

HVAC Show

Basic Air Conditioning, Electrical Controls and Troubleshooting

ID: CEHVA-520

This course includes basic information on air conditioning, electrical wiring, and control circuits. The student will also learn fundamental troubleshooting techniques. This course is an excellent prerequisite for the Everything You Need to Know About Heat Pumps class.

  • Total Hours: 15.00
  • CEUs: 1.50
View available classes

Heat Pumps - Everything You Need to Know

ID: CEHVA-500

Service technicians - enhance your service and repair abilities. Learn the inner workings of heat pump systems from refrigerant circuits and components to defrost controls and troubleshooting.

  • Total Hours: 15.00
  • CEUs: 1.50
View available classes

NATE Heat Pump Certification

ID: CEHVA-510

Prepare for NATE certification in four areas: heat pump installation, heat pump servicing, air conditioner installation, and air conditioner servicing.

  • Total Hours: 15.00
  • CEUs: 1.50
View available classes

Manufacturing Show

Biofuel Production Operations - Online

ID: CEGAT-641

The Biofuel Production Operations Online Training Program will give you the education you need to begin an exciting career in biofuel production. As a biofuel production operator, your job will be to ensure the quality and purity of the biofuel your plant produces. This involves inspecting and repairing equipment, operating computer systems, and handling lab equipment. This online program will ensure you have the skills you need to handle these tasks. At the present time, hundreds of facilities worldwide are producing biofuels. Over the next few decades many advances will be made in this field, and hundreds of new facilities will be built to produce this type of fuel. This opens a new field for potential workers. For decades to come, biofuels will be produced and consumed in the United States, creating an ongoing demand for biofuel production workers.

  • Total Hours: 400.00
  • CEUs: 40.00
View available classes

Blueprint Reading and Basic Measuring Tools

ID: CEMFG-588

An introductory course in blueprint reading or precision measuring tools. This course will take you through the alphabet of lines, views, and general rules for reading engineering blueprints. This course will also provide hands-on training in the use of micrometers, calipers, height gages, indicators and various transfer gages.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Chemical Plant Operations - Online

ID: CEGAT-643

Prepare for an entry-level position in a chemical plant with the Chemical Plant Operations Online Training Program. In the United States, there are thousands of chemical manufacturing facilities, run by chemical plant operators. These operators are highly paid and enjoy a stable work environment. There is an ongoing need for entry-level personnel. This program can help you get your start in this field!

  • Total Hours: 400.00
  • CEUs: 40.00
View available classes

Fundamentals of CNC Operator/ Programmer Training

ID: CEMFG-572

Gain the knowledge to become a CNC operator/programmer. Topics covered: shop math, right angle trig., English/Metric conversion tooling for mills and lathes, CNC offsets, cutting speed and fee calculations, inter-working, and functionality of the actual CNC machine components. Prerequisite: Blueprint Reading, Mills and Lathe classes.

  • Total Hours: 54.00
  • CEUs: 5.40
View available classes

Introduction to Lathes

ID: CEMFG-626

Learn the set-up and basic working knowledge of machining lathes. Learn proper safety, care, set-up and operation of manual turning lathe. An excellent course for students with little machining background or students taking the CNC Operator/Programmer certificate program. Prerequisite: Blueprint Reading & Basic Measuring Tools course.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Introduction to Mills

ID: CEMFG-627

Learn the set-up and basic working knowledge of vertical mills. Learn proper safety, care, set-up and operation of manual machine shop mills. An excellent course for students with little machining background or students taking the CNC Operator/Programmer certificate program. Prerequisite: Blueprint Reading & Measuring Tools course

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Locksmithing Certificate

ID: CELKS-503

Fundamental theories of locksmithing are introduced, enabling students to apply beginning skills. Lessons include blank key cutting, lock disassembly, lock reassembling and lock pinning. History, applications and tools will be covered. Current SLED background check required, $25. Report due at first class meeting. Text included.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Machinist and Computer Numerical Control (CNC) Operator Certificate Program Scholarship Information Session Only""

ID: CECES-702

If you are interested in becoming a Machinist/CNC Operator working in the metalworking industry please attend this scholarship information session to learn more about MTC's certificate program beginning in August. This program focuses on teaching students the core skills and knowledge needed to become an entry level CNC operator in an advanced manufacturing operation. Employment opportunities are currently available with great pay and great benefits. Scholarships are available for qualified candidates.

  • Total Hours: 2.00
  • CEUs: 0.20
View available classes

Manufacturing Applications - Online

ID: CEETG-948

Increase efficiencies and productivity by learning to apply the principles and concepts of manufacturing. Discover the nature of strategy and learn how it leads to the development of manufacturing strategy. Understand the purpose of customer demand forecasting and find out what forecasting methods are suitable for which situations. Explore the nature of planning and learn how to effectively use Gantt charts and the precedence diagram method. Determine how purchasing, production and inventory control, and logistics support a manufacturing operation. Discover the basics of lean manufacturing and see how capacity management converts production plans into concrete products. Learn why manufacturing, industrial, and quality engineering are so essential to any firm.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Manufacturing Fundamentals - Online

ID: CEETG-729

Learn the basic skills required to work in the manufacturing field. Discover the role of production design, process planning, and the heart of 13 different manufacturing processes. Understand why facility location and plant layout decisions are so vital and learn how job design helps you accomplish company goals and achieve worker satisfaction. Find out what makes up the physical work environment and learn how to characterize different types of production materials. Master product development concepts such as the voice of the customer (VOC), quality function deployment (QFD), and failure mode and effects analysis (FMEA). Learn how performance measurements and standardization improve manufacturing operations.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Mastering CNC Programming

ID: CEMFG-580

An application-based course covering the knowledge and skills acquired from the Fundamentals and Principles classes. You will utilize your new knowledge to write CNC programs, select tooling and set up the CNC equipment to produce parts to specifications from your own CNC program. Prerequisite: Principles of CNC Operator/Programming

  • Total Hours: 48.00
  • CEUs: 4.80
View available classes

Principles of CNC Programming

ID: CEMFG-571

Transform blueprints into CNC machine programs by designing your own generated CNC programs on computer based simulators in the classroom. Topics covered include: machine language (G & M codes), work coordinates, various types of offsets, cutter compensation, canned cycles, etc. Prerequisite: Fundamentals of CNC Operator/Programmer.

  • Total Hours: 60.00
  • CEUs: 6.00
View available classes

Print Reading and Solidworks

ID: CEMFG-641

This course is designed to develop the basic skills and terminology required for visualization and interpretation of common prints used in the machine tool trades. This course also covers basic sketching, layout and solid modeling using Solidworks.

  • Total Hours: 98.00
  • CEUs: 9.80
View available classes

SC Manufacturing Certification (SCMC)

ID: CEMFG-635

The South Carolina Manufacturing Certification is a South Carolina certification program covering the skills needed by manufacturing workers. The credential is awarded upon successfully completing the Safety, Quality Practices and Measurement, Manufacturing Processes and Production, and Maintenance Awareness assessments. In addition we will be providing hands-on simulation training to reinforce the manufacturing skills taught in the classroom.

  • Total Hours: 200.00
  • CEUs: 20.00
View available classes

SC Manufacturing Certification Scholarship Information Session Only""

ID: CECES-681

If you are interested in improving your skills and joining a team of manufacturing professionals, come to this session to learn about MTC's South Carolina Manufacturing Certified Production Technician training program. The South Carolina Manufacturing Certified (SCMC) Production Technician program is a state and nationally recognized, industry-led training, and certification program focused on teaching students the core skills and knowledge needed to become an advanced manufacturing production worker. Employment opportunities are currently available with local employers. Scholarships are available for qualified candidates. Clean criminal background check and drug/alcohol screen required in order to qualify.

  • Total Hours: 2.00
  • CEUs: 0.20
View available classes

SCMC - Retest

ID: CEMFG-637

This class is only for students who need to retake one of the SCMC Certification exams.

  • Total Hours: 2.00
  • CEUs: 0.20
View available classes

Mechanical Show

Applied Math

ID: CEIMT-687

This course illustrates how math is used in Industrial Maintenance. Begin with basic math functions, explains decimal-fraction, conversions and the metric system. Review basic geometry, ratios and proportions, basic algebra, area, volume, circumference and tables. Explains right triangle trigonometry and other triangular applications in the trade.

  • Total Hours: 44.00
  • CEUs: 4.40
View available classes

Basic Mechanical Components

ID: CEIMT-693

This course identifies couplings, chain drives, bearings, mechanical and other seals, gaskets and O-rings. It covers the function and advantages of each and teaches how to select and install or remove the proper component. Fan and blower types and operation are also discussed. Safety & Rigging Fundamentals is a prerequisite for this course.

  • Total Hours: 80.00
  • CEUs: 8.00
View available classes

Bearings and Lubrication

ID: CEIMT-694

Explains lubrication safety, storage, classifications, selecting lubricants, additives, lubrication equipment and lubricating charts. Introduces plain, ball, roller, thrust, guide, flanged, pillow-block, and take-up bearings. It also explains bearing materials and bearing designations. Basic Mechanical Components is a prerequisite for this course.

  • Total Hours: 56.00
  • CEUs: 5.60
View available classes

Blueprint Reading

ID: CEIMT-691

The course explains different types of blueprint drawings (civil, architectural, structural, mechanical, plumbing/piping, electrical), how to interpret them and teaches field sketching. It explains orthographic projection, isometric and schematic drawings used to show electrical, piping, hydraulic, and pneumatic systems. Precision Measuring is a prerequisite for this course.

  • Total Hours: 72.00
  • CEUs: 7.20
View available classes

Fasteners and Anchors

ID: CEIMT-688

This class describes the various threaded and non-threaded fasteners used in Industrial Maintenance. Students will learn how to select the correct fastener and the proper methods of installation. Prerequisite: Applied Math.

  • Total Hours: 12.00
  • CEUs: 1.20
View available classes

Gearboxes

ID: CEIMT-695

This course identifies and explains gearboxes and their uses. Explains how they operate and various types of gears. Troubleshooting and repair of gearboxes will be demonstrated. It shows wear patterns and proper backlash and adjustment. Bearings & Lubrication is a prerequisite for this course.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes

Hand and Power Tools

ID: CEIMT-689

This class introduces students to various hand and power tools that are used in Industrial Maintenance applications. It explains basic hand tool safety and procedures for selecting, inspecting, using and maintaining the tools. Introduces different types of power tools and teaches procedures for selecting, using and maintaining these tools. Fasteners and Anchors is a prerequisite for this course.

  • Total Hours: 44.00
  • CEUs: 4.40
View available classes

Hydraulics and Pneumatics

ID: CEIMT-699

Describes pumps & valves used in hydraulic & pneumatic systems & their functions. Explains hydraulic/pneumatic system safety & basic principles of hydraulics, including Pascal's law and Bernaulli's principle. Covers how to inspect, troubleshoot and repair fluid power systems. Hands on training is included. Valves & Piping is a prerequisite for this course.

  • Total Hours: 72.00
  • CEUs: 7.20
View available classes

Precision Measuring

ID: CEIMT-690

This course covers the concept of measurement starting with rulers and levels. The class includes precision measuring tools such as calipers, micrometers, height gauges, surface plates and dial indicators. It explains how to read the various precision measuring instruments. Learn how to select, use & care for precision measuring tools. Hand & Power Tools is a prerequisite for this course.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes

Pumps

ID: CEIMT-696

This course explains pumps and their operation. It covers reciprocating pumps and various kinds of rotary pumps. A lesson on special-purpose pumps describes diaphragm pumps and pumps used for corrosive and abrasive materials. Also covered is the maintenance of pumps, including the replacement of packing glands, seals, and bearings. Gearboxes is a prerequisite for this course.

  • Total Hours: 40.00
  • CEUs: 4.00
View available classes

Safety and Rigging Fundamentals

ID: CEIMT-692

Learn how to work and rig loads safely. This course includes personal protective equipment, how to perform basic contruction tasks safely and what to do if an accident occurs. It covers the slings, hardware, hoists and hitches used in rigging operations. Highlights critical safety issues and accepted rigging techniques and practices. Blueprint Reading is a prerequisite for this course.

  • Total Hours: 20.00
  • CEUs: 2.00
View available classes

Shaft Alignment

ID: CEIMT-697

This course covers types of misalignment and aligning couplings using conventional and laser alignment techniques. How to measure shaft sag, perform vertical alignment and align machinery trains is discussed. Causes of vibration, vibration monitoring, vibration test equipment and how to field balance machines are included. Pumps is a prerequisite for this course.

  • Total Hours: 76.00
  • CEUs: 7.60
View available classes

Valves and Piping

ID: CEIMT-698

This course covers the selection, preparation, joining and support of copper, plastic and steel piping and fittings. The course provides instructions for cutting, threading and joining ferrous piping. Introduces chemical, compressed air, fuel oil, steam and water systems and explains how to identify piping systems according to color codes. Shaft Alignment is a prerequisite for this course.

  • Total Hours: 40.00
  • CEUs: 4.00
View available classes

Purchasing Show

Cert. Green Supply Chain Professional

ID: CEGAT-692

The Certified Green Supply Chain Professional Online Training Program will give you the specialized knowledge to enable a company to achieve its environmental sustainability goals through global sourcing, materials management, procurement and buying, transportation and logistics, and new product development.

  • Total Hours: 60.00
  • CEUs: 6.00
View available classes

Purchasing and Supply Chain Management - Online

ID: CEGAT-554

The Purchasing and Supply Chain Management Online Training Program will introduce you to the fundamental aspects of the supply chain environment, including enterprise resource planning systems and requirement systems. The interrelationships between purchasing, vendor selection, sources of supply, and technology will also be explored in this program. The focus is on management and the skills and resources that a successful manager needs. This online certificate program is offered in partnership with major colleges, universities, and other accredited education providers. This program is best-suited for someone with little or no experience in purchasing management. PMBOK® Guide, PMI®, PMP®, CAPM®, and the PMI R.E.P. logo are either marks or registered marks of the Project Management Institute, Inc.

  • Total Hours: 300.00
  • CEUs: 30.00
View available classes

Purchasing Fundamentals - Online

ID: CEETG-829

This course serves as a high-level overview of the broad purchasing body of knowledge. The supply chain concept is used as a framework in facilitating understanding that must take place regarding the role that purchasing plays in an organization's success. Administration of the purchasing department, basic legal issues, organizational interfaces and negotiations are course highlights.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Supply Chain Management Fundamentals - Online

ID: CEETG-848

An introductory class that integrates key Supply Chain activities including purchasing, manufacturing, distribution and customer demand. Tools are provided that are directly related to future career success, peer and industry recognition and improved decision-making. Topics covered include: forecasting, master planning, material requirements planning, inventory management, capacity planning, production activity control, distribution and sales and operations planning. Process flows beginning with suppliers and ending with customers are reviewed. Essential definitions and key relationships are explored.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Safety and Environmental Show

Asbestos Inspector

ID: CEASB-508

Federal and state regulations require specific training for personnel involved in asbestos management. This inspector course is designed for individuals who inspect for the presence of asbestos. SC-DHEC and NC-DHHS approved. Requires pre-notification to regulatory authorities and may be used for NC and SC licensing.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Asbestos Inspector Refresher

ID: CEASB-501

Upon successful completion of the course, students will receive certificates of re-accreditation that may be used for licensing purposes.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 4.00
  • CEUs: 0.40
View available classes

Asbestos Management Planner Refresher and Asbestos Inspector Refresher

ID: CEASB-507

This course combines the four-hour Asbestos Inspector Refresher Training and the four-hour Asbestos Management Planner Refresher training. It reviews the initial Asbestos Inspector course and the Asbestos Management Planner course. Students will receive certificates of re-accreditation that may be used for licensing purposes.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Asbestos O and M Worker

ID: CEASB-510

This course meets SC-DHEC and EPA AHERA/ASHARA requirements for operations and maintenance workers performing clean-up or repair activities on friable asbestos-containing materials in schools, municipal water facilities, industrial manufacturing, and electrical generating facilities. Requires annual refresher.

  • Total Hours: 16.00
  • CEUs: 1.60
View available classes

Asbestos O and M Worker Refresher

ID: CEASB-509

Reviews the initial Asbestos Operations and Maintenance Worker course. Students will receive certificates of re-accreditation used for licensing. SC-DHEC, NC-DHHS, and OSHA approved asbestos abatement training. Requires pre-notification to authorities and may be used for NC and SC licensing as an asbestos abatement professional.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Asbestos Supervisor

ID: CEASB-505

The course meets SC-DHEC and EPA AHERA/ASHARA requirements for supervisors of asbestos projects and the NIOSH 582 course. Also for SC-DHEC licensing for persons performing air monitoring on asbestos projects and for the OSHA Competent Person training for all asbestos work in accordance with 1926.1101. Annual refresher required.

  • Total Hours: 37.50
  • CEUs: 3.75
View available classes

Asbestos Supervisor Refresher

ID: CEASB-506

Reviews the initial AHERA Asbestos Supervisor course required for asbestos abatement supervisors in schools and public and commercial buildings and meets the annual refresher training requirements for OSHA Class I and II Competent person and SC-DHEC Asbestos Supervisor licensees. Students will receive certificates used for licensing.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 7.50
  • CEUs: 0.75
View available classes

Asbestos Worker

ID: CEASB-503

This course meets SC-DHEC and EPA AHERA/ASHARA accreditation requirements for abatement workers disturbing friable asbestos in schools and in public and commercial buildings. The course meets the requirements of OSHA 1926.1101. Course completers receive a certificate of accreditation used for licensing purposes.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Asbestos Worker Refresher

ID: CEASB-504

This course reviews the initial AHERA Asbestos Worker course required for asbestos abatement workers in schools and public and commercial buildings. The course meets the annual refresher training requirements for OSHA Class I asbestos workers and SC-DHEC Asbestos Worker licensees. Students receive certificates for licensing purposes.Student musthave completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 7.50
  • CEUs: 0.75
View available classes

HazWoper 24-Hour Moderate Risk - Online

ID: CEPTN-687

This Internet-based course provides 24 hours of interactive training online for those needing Moderate Risk certification (29 CFR 1910.120). Topics include exercises on PPE, Regulations, Site Characterization, Confined Space, Decontamination, etc. The course consists of an online text, interactive exercises, web links, self-grading quizzes, and final exam.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Lead Renovation, Repair and Painting

ID: CELED-500

EPA rules apply to contractors who renovate or repair housing, child-care facilities or schools built before 1978. Trained contractors and workers must follow lead-safe work practice standards to reduce potential exposure to dangerous levels of lead during renovation and repair work. These standards are taught in this course.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Lead Renovation, Repair and Painting Refresher

ID: CELED-507

For those who have taken the initial Lead Renovation, Repair & Painting course, this is a one half day refresher course to licensing as mandated by EPA regulations. This course reviews the contents of the initial course & is required by EPA every five years. Abatement professionals may take this refresher instead of the initial course to satisfy EPA requirements.Student must have completed the initial training class and bring their certificate of completion as proof when they attend this class.

  • Total Hours: 4.00
  • CEUs: 0.40
View available classes

Lead Safe Weatherization

ID: CELED-505

In addition to the EPA certification requirements for lead renovators, workers performing weatherization in pre-1978 housing funded by the US Department of Energy (DOE) must have training in Lead Safe Weatherization.

  • Total Hours: 8.00
  • CEUs: 0.80
View available classes

Small Engine Mechanic Show

Small Engine Mechanic

ID: CESME-506

Gain a working knowledge of types and operation of small engines, engine service and repair of outdoor power equipment, engine tune-up procedures and troubleshooting methods, engine failure analysis, engine performance measurement, engine system and engine rebuild procedures. See www.midlandstech.edu/training for required tools. Lots of hands on learning.

  • Total Hours: 45.00
  • CEUs: 4.50
View available classes

Sustainability Show

Certified Indoor Air Quality Management - Online

ID: CEPTN-506

The Certified Indoor Air Quality Manager (CIAQM) course is comprehensive in its scope, covering concepts in IAQ management, preventative maintenance, microbiology, chemistry, building science, physics, engineering, construction, medicine and law. The course gives you practical steps to establish an IAQ Management Plan for your facility that will help you collect, log and resolve air quality complaints. The course also prepares you for the only accredited certification specifically designed for those that manage indoor air quality problems, sponsored by the American IAQ Council. 28 hours. 3 months access.

  • Total Hours: 28.00
  • CEUs: 2.80
View available classes

Certified Indoor Air Quality Manager - Online

ID: CEGAT-572

Are you a facility manager, building engineer, or health and safety officer who wants to improve the indoor air quality of your building? Are you properly prepared to handle air quality complaints? Common mistakes can turn a small grievance into a wildfire of speculation and accusation. In this Certified Indoor Air Quality Manager Training and Certification Program, you'll learn how to diagnose, resolve, and prevent indoor air quality (IAQ) complaints. You'll also establish a comprehensive IAQ plan specific to your buildings.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Certified Indoor Environmentalist - Online

ID: CEPTN-617

The Certified Indoor Environmentalist Course Online is an in depth program teaching you the core skills needed to perform indoor environmental assessments of all building types. The course not only provides the fundamentals of indoor air quality, it teaches more advanced topics that will educate even seasoned veterans in the field.

  • Total Hours: 32.00
  • CEUs: 3.20
View available classes

Certified Indoor Environmentalist Prep - Online

ID: CEGAT-573

Would you like to become a Certified Indoor Environmentalist (CIE)? This designation demonstrates that you understand how to create healthy homes and buildings by preventing, diagnosing, and resolving indoor environmental problems. This class prepares you to pass the CIE examination through a series of video lectures on exam topics such as contaminants, health effects, building science, HVAC, equipment, assessments, mold remediation, and industry standards and guidelines. The course also covers practice questions in detail and provides a practice examination to ensure you succeed at becoming a Certified Indoor Environmentalist.

  • Total Hours: 24.00
  • CEUs: 2.40
View available classes

Certified Microbial Investigator - Online

ID: CEPTN-618

Take your HVAC or mold inspection services to a new level by learning the latest advances in the industry and while you`re at it, getting the industry`s most recognized microbial certifications, Council-certified Microbial Investigator (CMI) and Council-certified Microbial Consultant (CMC). We`ll teach you the core skills needed to perform impressive assessments that will set you apart from the competition.

  • Total Hours: 28.00
  • CEUs: 2.80
View available classes

Commercial Energy Consultant - Online

ID: CEPTN-619

This program consists of training, certification, and business start-up kit. You will receive everything you need to be able to go out and start conducting retail energy audits. The Commercial Energy Consultant Training Program is a comprehensive training program designed to teach you the basics of energy auditing, the economics of energy and how to turn that knowledge into a functioning, profitable business for yourself. Once you have successfully completed the Commercial Energy Training Program and passed the NEASI Commercial Energy Certification exam, you are fully prepared to start your very own energy business. The best way to jump-start your Energy Business is with our Commercial Energy Business Kit.

  • Total Hours: 25.00
  • CEUs: 2.50
View available classes

Home Energy Auditor - Online

ID: CEPTN-626

This program consists of training, certification, and business start-up kit. You will receive everything you need to be able to go out and start conducting home/residential energy audits. You will learn to identify the common energy wasting areas of a residence. You will also learn more in-depth energy conservation techniques to enable you to provide your clients with the maximum in energy savings insight. Each course is easy to follow and understand, yet detailed and descriptive to educate you thoroughly. Once you have successfully completed the Home Energy Training Program and passed the NEASI Home Energy Certification exam, you are fully prepared to start your very own home energy business. The best way to jump-start your energy business is with our Home Energy Business Kit.

  • Total Hours: 25.00
  • CEUs: 2.50
View available classes

LEED AP Interior Design and Construction Career Prep - Online

ID: CEPTN-675

This course, LEED AP Interior Design and Construction Exam Prep, prepares you for the Leadership in Energy and Environmental Design (LEED ®) Accredited Professional (AP) Interior Design + Construction (ID+ C) exam. It provides a road map to studying for the LEED AP ID+ C exam as administered by Green Building Certification Institute (GBCI). The course is aimed at those professionals seeking more information about the basic knowledge and understanding that is required in order to pass the exam and earn the LEED AP ID+ C accreditation.

  • Total Hours: 100.00
  • CEUs: 10.00
View available classes

LEED AP Operations and Maintenance Career Prep - Online

ID: CEPTN-676

This course prepares you for the Leadership in Energy and Environmental Design (LEED®) Accredited Professional (AP) Operations + Maintenance (O+M) exam. It provides a road map to studying for the LEED AP O+M exam as administered by Green Building Certification Institute (GBCI). The course is aimed at those professionals seeking more information about the basic knowledge and understanding that is required in order to pass the exam and earn the LEED AP O+M accreditation.

  • Total Hours: 100.00
  • CEUs: 10.00
View available classes

LEED Green Associate Career Prep - Online

ID: CEPTN-677

This course is designed to help students pass the Green Associate exam, certifying their knowledge of the green industry's preeminent standards: the first step in becoming a LEED Professional. In an easy-to-review format, it ties all the critical points students need to know about green building. It provides many flexible study tools, including individual and group learning activities, as well as review and practice questions utilizing the same format as the actual exam.

  • Total Hours: 75.00
  • CEUs: 7.50
View available classes

Principles of Green Building

ID: CEGAT-696

The Principles of Green Buildings Online Training Program is designed to teach you the principles you must know in order to make buildings perform more efficiently. The program was developed and written in partnership with nationally recognized building science experts from Advanced Energy of North Carolina. The Principles of Green Buildings Online Training Program will also help prepare you for industry credentials for green building. Materials are included. This online certificate program is offered in partnership with major colleges, universities, and other accredited education providers.

  • Total Hours: 30.00
  • CEUs: 3.00
View available classes

Renewable Energy Technician Career Prep - Online

ID: CEPTN-679

This course gives the background for renewable energy sources and describes their occurrence, devices for using them, and the role of renewable energy in current and future energy systems, depending on social values and the economic rules used to judge the viability of competing solutions.

  • Total Hours: 380.00
  • CEUs: 38.00
View available classes

Senior Certified Sustainablility Prof - Online

ID: CEGAT-609

The Senior Certified Sustainability Professional Training Program will prepare you for an exciting career as a leader in the green-collar economy. As a certified sustainability professional, you'll be responsible for setting the course and coordinating an enterprise's sustainability strategy. Millions of new jobs in this rapidly growing sector will be available to people who set themselves apart from the crowd by earning the professional credentials and skills they need to lead sustainable business practices.

  • Total Hours: 110.00
  • CEUs: 11.00
View available classes

Solar Power Professional - Online

ID: CEGAT-651

In this program, you'll learn the fundamentals of photovoltaic solar powered energy systems, gaining the knowledge you'll need for an entry level position with a dealer, installer, or other photovoltaic industry company.

  • Total Hours: 120.00
  • CEUs: 12.00
View available classes

Solar Water Heating Technician Career Prep - Online

ID: CEPTN-680

This course covers solar fundamentals, site assessment, system design and sizing, the installation and service of system components, system startup and maintenance, and worker safety. Solar Water addresses residential and light commercial solar water heating systems for domestic hot water and swimming pool applications.

  • Total Hours: 70.00
  • CEUs: 7.00
View available classes

Start Your Own Business in Solar And Wind Energy Career Prep Complete - Online

ID: CEPTN-682

The purpose of this course is to give the student tools, information, and strategies to equip them in a way that will give them the best chance of success when starting a Solar and Wind Energy business. We will discuss topics such as risk, economics, the global market, ethics, legal considerations,organization, humans resources, and marketing. As a student reads, completes practices and assignments, discusses with others, and takes assessments, he or she will gain a practical understanding of the components of a small business and the steps that one takes to create and establish that business, from the idea, to the business plan, to the strategies for helping that business to succeed and grow.

  • Total Hours: 580.00
  • CEUs: 58.00
View available classes

Start Your Own Business in Solar Energy - Online

ID: CEPTN-683

The purpose of this course is to give the student tools, information, and strategies to equip them in a way that will give them the best chance of success when starting a Solar Energy business. We will discuss topics such as risk, economics, the global market, ethics, legal considerations, organization, humans resources, and marketing. As a student reads, completes practices and assignments, discusses with others, and takes assessments, he or she will gain a practical understanding of the components of a small business and the steps that one takes to create and establish that business, from the idea, to the business plan, to the strategies for helping that business to succeed and grow.

  • Total Hours: 340.00
  • CEUs: 34.00
View available classes

Sustainable Business Management Career Prep Expert - Online

ID: CEPTN-684

This course defines the subject matter of sustainable and green marketing, and illustrates how green marketing can be incorporated into strategic planning. It addresses the interplay between environment and consumption, and an organizations effort to offer superior value to consumers via sustainable oriented marketing practices.

  • Total Hours: 340.00
  • CEUs: 34.00
View available classes

Sustainable Business Management Career Prep Master - Online

ID: CEPTN-685

This course defines the subject matter of sustainable and green marketing, and illustrates how green marketing can be incorporated into strategic planning. It addresses the interplay between environment and consumption, and an organizations effort to offer superior value to consumers via sustainable oriented marketing practices. As a Sustainable Supply Chain Manager you will need to develop action plans, and implement green supply chains. This course provides a firm foundation for supply change management and tips to help you implement green initiatives. In this course you will learn to make concrete supply chain decisions and identify lean and green savings for supply chains.

  • Total Hours: 430.00
  • CEUs: 43.00
View available classes

Sustainable Business Management Career Prep Professional - Online

ID: CEPTN-686

This course will provide students with a thorough understanding of management, with a focus on the characteristics of successful managers, manager development, and the importance of critical thinking in management. Using a theoretical approach, this course will encourage students to define effective management and identify the strategies necessary to be successful business managers. Upon completion of this course, students will be fully prepared to begin working as business managers.

  • Total Hours: 240.00
  • CEUs: 24.00
View available classes

Sustainable Construction Career Prep- Online

ID: CEPTN-688

This course describes the high-performance green building delivery system, a rapidly emerging building delivery system that satisfies the owner while addressing sustainability considerations of economic, environmental, and social impact, from design through the end of the building's life cycle. A building delivery system is the process used by building owners to ensure that a facility meeting their specific needs is designed, built, and handed over for operation in a cost-effective manner.

  • Total Hours: 155.00
  • CEUs: 15.50
View available classes

Sustainable Energy and Management Career Prep Expert - Online

ID: CEPTN-689

The skyrocketing demand for clean, abundant energy has resulted in a need for comprehensive information that can be used by builders, technicians, energy industry professionals, and anyone else wanting to learn about alternative forms of energy and their everyday uses. With a vast array of information available on the subject, this course stands out from other courses because it bridges the gap between overly simplistic information and high-level engineering materials. Instead, this course explores solar, wind, and other sources, and the technology available to harness them. Learners will gain a better understanding of how these systems work as well as how they are put together.

  • Total Hours: 430.00
  • CEUs: 43.00
View available classes

Sustainable Energy Career Prep Master - Online

ID: CEPTN-690

This course explores realistically, and in detail, the world's enormous potential for human and ecological regeneration. It also explains why this potential has been suppressed or distorted by industrial institutions, thus creating economic crisis, growing inequality, and environmental destruction. As a Sustainable Supply Chain Manager you will need to develop action plans, and implement green supply chains. This course provides a firm foundation for supply change management and tips to help you implement green initiatives. In this course you will learn to make concrete supply chain decisions and identify lean and green savings for supply chains.

  • Total Hours: 690.00
  • CEUs: 69.00
View available classes

Sustainable Photovoltaic Career Prep Expert - Online

ID: CEPTN-691

The Photovoltaic Technician Career Prep course covers the principles of photovoltaics and how to effectively incorporate PV systems into stand-alone or interconnected electrical systems. The content includes system advantages and disadvantages, site evaluation, component operation, system design and sizing, and installation requirements and recommended practices. Common scenarios and procedures are discussed throughout. This course gives the background for renewable energy sources and describes their occurrence, devices for using them, and the role of renewable energy in current and future energy systems, depending on social values and the economic rules used to judge the viability of competing solutions.

  • Total Hours: 500.00
  • CEUs: 50.00
View available classes

Sustainable Solar and Wind Technician Career Prep Expert - Online

ID: CEPTN-692

This course covers the principles of photovoltaics and how to effectively incorporate PV systems into stand-alone or interconnected electrical systems. The content includes system advantages and disadvantages, site evaluation, component operation, system design and sizing, and installation requirements and recommended practices. Common scenarios and procedures are discussed throughout. The course also provides an overview of wind-energy history, basic concepts, costs, and uses. It is designed for the novice and emphasizes an overview of wind-energy conversion and applications of various wind-turbine systems.

  • Total Hours: 450.00
  • CEUs: 45.00
View available classes

Sustainable Solar and Wind Technician Career Prep Professional - Online

ID: CEPTN-693

This course covers solar fundamentals, site assessment, system design and sizing, the installation and service of system components, system startup and maintenance, and worker safety. Solar Water addresses residential and light commercial solar water heating systems for domestic hot water and swimming pool applications. The course also provides an overview of wind-energy history, basic concepts, costs, and uses. It is designed for the novice and emphasizes an overview of wind-energy conversion and applications of various wind-turbine systems. Some additional course features include: wind turbine blades, installing and troubleshooting wind turbines, motors, towers, and electrical coverage.

  • Total Hours: 390.00
  • CEUs: 39.00
View available classes

Sustainable Solar Technician Career Prep Professional - Online

ID: CEPTN-694

The Photovoltaic Technician Career Prep course covers the principles of photovoltaics and how to effectively incorporate PV systems into stand-alone or interconnected electrical systems. The content includes system advantages and disadvantages, site evaluation, component operation, system design and sizing, and installation requirements and recommended practices. Common scenarios and procedures are discussed throughout.

  • Total Hours: 210.00
  • CEUs: 21.00
View available classes

Sustainable Solar Water Heating Career Prep Professional - Online

ID: CEPTN-695

This course gives the background for renewable energy sources and describes their occurrence, devices for using them, and the role of renewable energy in current and future energy systems, depending on social values and the economic rules used to judge the viability of competing solutions. This course covers solar fundamentals, site assessment, system design and sizing, the installation and service of system components, system startup and maintenance, and worker safety. Solar Water addresses residential and light commercial solar water heating systems for domestic hot water and swimming pool applications.

  • Total Hours: 430.00
  • CEUs: 43.00
View available classes

Sustainable Supply Chain Management Career Prep - Online

ID: CEPTN-696

As a Sustainable Supply Chain Manager you will need to develop action plans, and implement green supply chains. This course provides a firm foundation for supply change management and tips to help you implement green initiatives. In this course you will learn to make concrete supply chain decisions and identify lean and green savings for supply chains.

  • Total Hours: 90.00
  • CEUs: 9.00
View available classes

Wind Energy Professional - Online

ID: CEGAT-652

Wind energy companies are growing exponentially to meet America's demand for clean, renewable, domestic energy. This entry-level Wind Energy Professional Online Training Program prepares you for a career in the wind energy industry.

  • Total Hours: 240.00
  • CEUs: 24.00
View available classes

Featured Program

Small Engine Mechanic

This training program provides participants with a working knowledge of types and operation of small engines, engine service and repair of outdoor power equipment. Learn how to perform engine tune-up procedures and troubleshooting methods, engine failure analysis; engine performance measurement, engine system and engine rebuild procedures.

Learn More