The form on this web page requires the use of Adobe Acrobat Reader. If your browser does not support this product, you can easily download Adobe Acrobat to install on your computer.
Click here for a Print friendly Tool List or select a category from the list below. (All tools are required)
General Tools
- Safety glasses
- Fender cover
- Air Blow Nozzle
- Tire Air Chuck
- Tire Air Gauge
- Wire Brush (12 inches minimum)
- Magnetic Pickup Tool
- Air Conditioning Thermometer
- 12' Extension Tape
- 6'' Steel Machinist Rule
- 16oz. Soft Face Hammer (Plastic/Rubber)
- 32oz. Ball Peen Hammer
- Punch and Chisel Set (at least 12 pcs.)
- 8'' Brass Drift Punch
- Oil and Gas Filter Wrench (Belt Type 1/2'' drive)
- Hack Saw
- Spark Plug Gap Gauge Set (wire type: .035 - .080)
- Master Feeler Gauge Set (blade type)
- Gasket Scraper
Brake Tools
- Brake Hold Down Spring Tool
- Brake Return Spring Tool
Screw Drivers
- Slotted: 3'', 6'', 9'', 12'', and 1 Stubby
- Phillips: 6'' - #1, 6'' - #2, 12'' - #3, and Stubby #2
- Slotted Screw Starter
- Phillips Screw Starter
Wrenches
- Standard Combination Wrenches: 1/4'' thru 1'' (inclusive)
- Metric Combination Wrenches: 7mm thru 19mm (inclusive)
- Metric Line Wrench Set: 10mm thru 18mm (inclusive)
- Standard Line Wrench Set: 3/8 thru 11/16 (inclusive)
- 10'' Adjustable Wrench
- Standard Hex Key (allen) Wrench Set (10 piece)
- Metric Hex Key (allen) Wrench Set (10 piece)
Socket Sets
- 1/4 Drive Socket Set Including:
- Ratchet
- Extension
- Driver Handle
- Metric Sockets (Short & Deep - 6mm thru 13mm inclusive)
- Standard Sockets (Short & Deep - 3/16'' thru 1/2'' inclusive)
- 3/8 Drive Socket Set Including:
- Ratchet
- Extension Set: 3'', 6'', 24''
- Universal Joint
- Standard Sockets: 3/8'' thru 7/8'' - Deep and Shallow (inclusive)
- Metric Sockets: 10mm thru 19mm - Deep and Shallow (inclusive)
- 3/8 Drive Universal Spark Plug Sockets: 5/8'' and 13/16''
- 1/2 Drive Socket Set Including:
- Ratchet
- Extension Set: 5'' and 10''
- Breaker Bar
- Standard Sockets: 1/2'' thru 1'' (Short or Deep) (inclusive)
- Torque Wrench 200 ft. lb. capacity (or higher)
- 3/8'' to 1/2'' Adaptor
- 1/2'' to 3/8'' Adaptor
- Torx Bits: T-10, T-15, T-20, T-30, T-40, T-45, T-50
Pliers
- 7''Needle Nose Pliers
- 7'' Diagonal Pliers
- 9'' Interlock Joint Pliers (channel lock)
- 9'' Standard Common Pliers
- Vise Grip Pliers (8'' to 10''
- Spark Plug Wire Removal Pliers
- Snap Ring Plier Set w/Tips for Internal & External Operations
Electrical
- 12 Volt Test Light
- Battery Side Post Cleaner (Alternate is small brass wire brush 6'' min.)
- Battery Top Post Cleaner
- Digital Multi-Meter: 10 Mega-Ohm Impedance
Tool Storage
|
